Before i forget,
                 MERRY CHRISTMAS TO ALL OF YOU ON THIS GROUP.
                     AND A HAPPY NEW YEAR.
                            From Chris,in Addlestone  Surrey.

My 309GL - cost £100 - brilliant car..
but
when i have the head lights on  i cant use the horn or Flash the main
beam???

Just wondering where the post heating thermal switch is located on a
95` 306 TD. And the best possible ways to test it? Thanks

I am looking towards putting fuel injectors in my `95 306 TD. i have
found some reconditioned injectors from a Citroen Xantia  1.9 TD,
Bosch Part number is KCA17S42, can anyone tell me if they are correct
spec for my car?

Just reporting success with a fix to my indicator switch on my X-reg 1.9D 206.
After 45K it was starting to indicate at inopportune moments :(
This is a non-multiplexed 206 (It think!)
I took out the switch (remove 2x hex screws on bottom cover of steering

How do I remove the mirror to replace it?
What's the best bet for a replacement? Halfords (expensive but clean
and quick and may not fit 100%) scrappy (cheap, proper fit  but dirty
and cold, and maybe not quick).... Peugeot dealer (expensive? probably

Bonjour,
Le pb c'est que je n'ai pas eu le CD avec la voiture, donc je ne sais pas
quoi mettre dedans.
L'auto-radio n'est pas un RT3, c'est un auto-radio cassette Clarion avec

Hi Group.
         Is it prosible to plug and seal the bleed valve in a rad on a
pug 405????
thanks from Chris Addlestone Surrey

Hi. is there a simple way to check if Turbo is working on a 406 LXDT?
TIA

Not much is the answer but dealers try to get £300 for them! while
some never sell on Ebay and the local scrappy offered me a tenner.
How / how much should I sell mine for? Ebay want an extorsionate £6
listing and £15 if it sells!! Two weeks internet only ad in Autotrader

Any help appreciated - I have bought a Gunson Fault Detector for my Peugeot
306 XSi (2.0 8v '96 model, old shape), as the engine light keeps coming on,
but I just can't find where to plug it in.
Can anybody direct me?

Just for info if you may want to change yours.
Mine was set to 1000 when I got the car but this was a bit noisy and I
thought I'd put it back to 750. In doing so I set it as low as possible
(500) and increased the speed to see what was both quietest and the

I know it's done through adjusting the lengths of the steering arm rods
(coming from the rack). -
I can see the end of the rods (ball joint / hub end) seems just to go
onto a threaded shaft - with no lock nut. The arm coming out from the

engine turns over and tries to start
diesel at injectors but will not start

Hi there,im looking to buy a 307 hdi,but am not sure what engine to
get,whats the 1.4 like....is it underpowered?ive currently got a 1.9dt
306.any advice would be cool.
martyn.