| Thread | Last Post | Replies |
|
| 307 2l HDi test drive | 15 Jan 2006 13:25 GMT | 3 |
Just took one of these for a test drive. Very impressed, will definately be my next car. Handling was impressive to say the least. Paul.
|
| 205 - corroded brake pipes | 15 Jan 2006 12:06 GMT | 4 |
I'm renewing the rear brake pipes (only a small section) on my Peugeot 205. After copious sprays of Plusgas yesterday and this morning, I managed to loosen the union to the flexible pipe and the nut on the backplate for the near-side, but the off-side is a problem.
|
| dreaded 405 matrix | 14 Jan 2006 21:26 GMT | 3 |
I have a 95 405 (uk car) heater matrix leaks!! can anyone tell me if I can do the job without remving the dash? The car has air con.
|
| Check this out 9 mins to go!! Fuel Cap! | 14 Jan 2006 15:33 GMT | 1 |
Check this out! Only mins left! Peugeot 206! http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=4601970204&rd=1&sspagename= STRK%3AMESE%3AIT&rd=1
|
| lights | 13 Jan 2006 19:32 GMT | 8 |
Hi Group. Has anybody got any idea what the best headlights are to use?/ driving back down little dark roads from the coast my ligts where not very good so if any body got any idea.the lamps are o.k.and yes the
|
| 406 Exec 2.0l Idling Rough/Chunky | 13 Jan 2006 18:28 GMT | 5 |
Hi, I have recently bought a 2000 406 Exec 2.0l which is a beautiful car and is very tidy (it was the natural replacement for my trusty 405 auto that was recently a right off after 6.5 years). However it is not as smooth as it should be. Sometimes (but not always) the car has a ...
|
| Peugeot 205 Mardi Gras 1.8 TD Front Brake Part Compatibility Problem | 13 Jan 2006 17:17 GMT | 3 |
Peugeot 205 Mardi Gras 1.8 TD Front Brake Part Compatibility Problem Hi, Please help me! I currently have vented front brake disks which are 21mm wide.Unfortunately my callipers only extend to 48mm leaving
|
| 406 windscreen wiper | 12 Jan 2006 18:43 GMT | 4 |
The windscreen wiper on my son's 406 has become erratic as to where it self parks.i.e.. anywhere on the screen. It now also gives 9 or 10 wipes after a washer spray. Any ideas?
|
| 306 1.9td m reg | 12 Jan 2006 17:36 GMT | 7 |
my friends 306 td has a problem when you turn off ignition the engine continues running as if you had'nt turned it off only the battery light stays on. he says it ran out of diesel and the bloke from the AA removed a T shaped bar and o - ring from some where
|
| 307 horn not working | 11 Jan 2006 23:16 GMT | 1 |
The horn on my 51 reg 307 1.6 Rapier has stopped working again. It did it previously about 2 years ago while it was under warranty and was fixed by the dealer. Even though it's now out of warranty, should I expect the dealer to fix
|
| Removal of brakecylinder | 11 Jan 2006 20:15 GMT | 3 |
Hello Peugeot fans, My Peugeot 309 need new brakes. How do I remove the nut shown on the picture here: http://www.kodakgallery.eu.com/PhotoView.jsp?&localeid=en_GB_EURO&collid=4192425 3933&photoid=31924253933
|
| 307 keyfob | 11 Jan 2006 17:11 GMT | 3 |
I am going to change the keyfob battery for my 307 as I have to get within 5 feet of the car for the remote to work now! I'd better change it before I get locked out! Is there a procedure to resync the keyfob with the car after the battery is
|
| 307 - wishbone bush gone! (on 2001 model) | 10 Jan 2006 13:05 GMT | 9 |
My wife's car just went for a full service and the Peugeot dealer said that the N/S/F wishbone bush is split. She's a careful driver and so it seems unusual for a car that's just over 4 years old, for bush to split.
|
| Pug 306 'P' 1.9 TD, power steering pump | 09 Jan 2006 20:00 GMT | 1 |
I understand that the power steering pump on this engine is fairly generic and used on many different cars - Peugeot & Citroen, can somebody help with info as I require one and they seem expensive, and I may be able to get one second hand.
|
| replacement Key | 09 Jan 2006 11:12 GMT | 2 |
Had a quick search through the archives, but couldn't find this so sorry if repeated. '99 V plate 406 GTX. Lost the main key with the remote, just using the other more manual one.
|