| Thread | Last Post | Replies |
|
| idle speed drops in my 309 | 22 Feb 2006 16:13 GMT | 4 |
Hi. I have problems with idle speed recently. I have TU 1.4 carb engine. Carburator has been rebuilt recently. When I stop at traffic light idle speed stays at 900-1000 for a few moments and then slowly drops until the engine finally dies. It happens regardless of engine being ...
|
| New 307 and GPS | 22 Feb 2006 12:43 GMT | 4 |
Hi People, About to go pick up my new 307 St.car at the end of this week, i would like some recommendations as far as navigations systems go. 1. I have been looking into the TomTom Go 500/700, but is it true that an
|
| 307 2.0 hdi cam belt | 22 Feb 2006 11:16 GMT | 1 |
when i had a 97' 306 1.9dt i changed my own cambelt,my question is,is the 307 roughly the same or are they any major differences...cheers...martyn.
|
| 407,Poor Brakes, nervous steering.poor ride | 22 Feb 2006 09:44 GMT | 6 |
I'm interested to hear from anyone with a 407 hdi 110 se saloon with concerns on: Poor brakes with long pedal travel, seems worse in slow traffic ! Also foot fouls on brake pedal mechanism and I'm only size 9 shoe!
|
| Peugeot 206 HDi Turbo: Anti-pollution fault | 21 Feb 2006 20:24 GMT | 4 |
I have a 3.5 year old 206 HDi Turbo, which has had no problems since I bought it until the last 2/3 months. I now have an issue with the warning "Anti-pollution fault" and a loss of power (usually only wet/cold mornings). I have taken the car into
|
| PEUGEOT 306 HEATER MATRIX | 21 Feb 2006 20:22 GMT | 1 |
HI THERE I HAVE JUST FITTED A NEW HEATER MATRIX BUT WHILST FITTING IT UP TO THE TWO PIPES THAT COME THROUGH THE BULK HEAD I BROKE THE PLASTIC CASING ON THE MATRIX INCLUDING THE HOLE FOR THE 7MM BOLT I HAVE GLUED THIS BACK TOGETHER AND FITTED IT TO THE CAR HOWEVER I HAVE YET TO FILL ...
|
| Steering wheel air bag cover | 21 Feb 2006 10:51 GMT | 1 |
Hello All, does anyone know how to remove without breaking, the plastic cover over the steering wheel airbag on my 307 There is a fault with the horn contacts which have become very intermittant and require attention.
|
| Peugeot 106 - Wiring to a pre-ignition 12v source | 21 Feb 2006 09:24 GMT | 4 |
Please can someone help me? I've just installed central locking into my 3dr 1994 106XR. Everything's done except the wiring. I need to wire in a live and earth. I've found the earth point in my car so I've screwed that on, however I don't know where to splice the live cable!!! I
|
| Pug 106 - airbag light on | 20 Feb 2006 16:20 GMT | 4 |
My wife has a 106 and this morning on the way to work the airbag light came on for no apparent reason, flashing on & off. It then went to constant on and when she restarted it later, it went back to flashing - she didn't drive it long enough to get the light constantly on.
|
| 406 hdi 90 non starter | 19 Feb 2006 18:31 GMT | 2 |
Hi Can any one shed some light on this one, car will not start off the key will only start when easy start sprayed in, runs fine then will cut out when pushed hard and at same time message comes up air pollution fault,
|
| Peugeot 206 noises | 19 Feb 2006 13:56 GMT | 5 |
Hiya, just wondering wheather anyone has experienced problems with their clutch on a 206. There's a scraping kind of noise coming from where my clutch disk/plate is but only happens when i rev my engine. When i push the clutch in and rev my
|
| peugeot 205 tyre pressures | 19 Feb 2006 12:22 GMT | 6 |
could anybody possibly tell me the tyre pressures on a peugeot 205 trio 954cc? as when i bought the car there wasnt an owners manual with it :S thanks
|
| XSi Dash warning lamps? | 18 Feb 2006 20:47 GMT | 5 |
Son has just bought an M reg 306 XSi and has a dash warning light on intermittently. Typically I can't find my handbook for my 306 HDi which may have helped! Could some kind soul scan the dash layout and mail it to me? Or failing that he says it's like a lamp with a
|
| Engine problem | 18 Feb 2006 20:36 GMT | 2 |
I recently removed my rocker cover from my 97 306 xsi to replace the rubber gasket seal, put the rocker cover back on, turned on the enginge and it cut out after about 2 seconds. So i took off the cover to check and found a washer had fallen and jammed in the shaft. the washer ...
|
| Mystery 306 Squeak/Whistle | 18 Feb 2006 20:18 GMT | 4 |
I've had a 306 1.9TD Estate for over a year. Every now and then a high piched whistling sound appears, sometimes a steady tone, sometimes with an oscillating modulation. I can drive for weeks or even months in silence, then the sound appears
|