| Thread | Last Post | Replies |
|
| Peugeot 406 2.0 16V ST | 13 Feb 2006 14:13 GMT | 1 |
I'm the lucky ovner of a great Peogeot 406, but does anybody have some good ideas of where to buy styling for it ? Michael
|
| help problem what fuel type petrol or diesel for 206 | 13 Feb 2006 14:04 GMT | 6 |
I have a friends car for the week (a pug 206), and he has asked to get her a refill of fuel for him coming back. He said that its a petrol engine however on the petrol cap it shows a black icon of a fuel pump with the letter P, surrounded by a "no" line, as if sayin "No Petrol".
|
| hdi cambelt. | 13 Feb 2006 13:58 GMT | 10 |
Anyone heard of cambelt breakage on these engines? I'm approaching 74,000 miles (Xantia 90 hdi - a bit power boosted) and the book says change at 100,000. If I leave it till autumn it will be up to 87,000.
|
| 406 v6 cam belt | 13 Feb 2006 13:26 GMT | 6 |
Hi all does anyone know how long a cam belt should last on a 3.0L V6 peugeot my cars done about 65000 and i am not sure if it needs one or not please help! ! regards icebox
|
| Overheating problem | 13 Feb 2006 13:17 GMT | 8 |
Hi, just noticed today a little connector that wasn't plugged in at the right side of the engine, some sort of sensor ? Anyway, now its plugged in I noticed the temperature guage on the dashboard is working and going into the red after a 3 mile or so drive, I presume the "sensor" ...
|
| Automatic wing mirrors 406 coupe | 13 Feb 2006 13:03 GMT | 3 |
I am looking at fitting the motors which help the wing mirrors come in automatically, does anyone know where i could get them from and roughly how much they would cost. and also is it an easy job? cheers
|
| Clarion Autochanger - 406 | 13 Feb 2006 12:53 GMT | 2 |
does anyone know of what(if anything) I could replace the clarion autochanger unit with in a 1999 406. many thanks John
|
| keyhole in the boot | 13 Feb 2006 12:43 GMT | 6 |
I dont suppose anyone her knows why the hell peugeot didnt put a keyhole on the boot of my W reg 206 xs? When my keyfob central locker thing dies I guess ill put a sign up saying 'boot locked, honest'
|
| Peugeot 206 | 13 Feb 2006 09:14 GMT | 2 |
Please can anyone help with a wiring diagram for a diesel 206 (not HDi) year 2000 have got starting probs . what voltages are at the pump as I hhink this is where the problem is !
|
| Peugeot 206 | 13 Feb 2006 09:13 GMT | 2 |
Has anyone else experienced problems with their new peugeot 206 cutting out whilst driving? I have had 2 Peugeots and both have had this problem i am really annoyed and would like some advice on the action other drivers are
|
| peugeot 309 grd | 12 Feb 2006 20:28 GMT | 1 |
can anyone tell me where the instrument illumination lights are situated and where the gearbox end of the speedo cable is situated for the peugeot 309 grd thanks a lot
|
| 306 speedometer cuts out | 12 Feb 2006 19:39 GMT | 1 |
My W reg 306 HDi's speedometer cuts out intermittantly. It drops straight to zero, the milometer stops clocking and the engine looses a very tiny bit of power. It doesn't usually last for more than a mile then kicks back in. Has anyone got any thoughts on what's wrong? My
|
| ECU Software upgrade | 12 Feb 2006 18:20 GMT | 9 |
I have a '97 306 XSi that has issues with cold stalling. I have tried all sorts of remedies and 3 garages can't find any physical fault. It has been suggested to get the software updated at a Peugeot dealer. Before I visit my local dealer to experience their 'excellent customer ...
|
| Engine stalling - see VIDEO - WWW.C4.SK | 12 Feb 2006 15:18 GMT | 4 |
I have problems with stalling (idling) of engine on Citroen XSARA 1.4i Break. I made a webpage WWW.C4.SK, there are some videos about my engine problems. Where is problem?
|
| 205 wings - how are they held on? | 12 Feb 2006 01:28 GMT | 2 |
I'm thinking of replacing both front wings on 205 #3 with the ones from one I am scrapping. I've read that they are just held on with bolts and glue, but wanted to check before I take it to bits and find that it's welded... And do you need to glue them on when replacing? (what glue
|