| Thread | Last Post | Replies |
|
| Bonnet Open switch, setting alarm off | 01 Apr 2006 00:37 GMT | 1 |
All, I have a Vreg 3.0 V6 406 and the alarm keeps going off through the night because it thinks the bonnet is open (it comes up on the IN CAR DISPLAY). Problem is I can't find this it. Back in the good old days of MOSS alarms
|
| 307 HDI gearbox noise?? | 29 Mar 2006 23:40 GMT | 3 |
Had to go to Bristol area yesterday, and had left some roof bars on the top. When I got there it was windy, and I heard a lot of noise like the wind whistling past the bars, so I took them off. Sadly the noise continued. In the end, at around 40 odd, it sounded like the noise you ...
|
| in situ valve seal replacement on a 205 1.6 GTi | 29 Mar 2006 22:32 GMT | 1 |
I have looked for information on this topic all over the net without much luck. I am going to use the air in the plug-hole method along with a Sealey VS160 valve spring compressor. That in itself is not the real
|
| peugeot 406 keypad | 29 Mar 2006 19:06 GMT | 5 |
my peugeot 406 had a keypad,just went to it one day this week and the keypad is just stuck on red light,i know my pin code but cant get the red light off,AA Breakdown tried a couple of things but no joy,any one know of any suggestions or what it may be
|
| 206 Starting prob | 28 Mar 2006 21:20 GMT | 6 |
I have a 4 year old 206. The engine would not turn last night all I had was a clicking noise what appeared to come from the drivers side of the car under or near the wing/bonnet.
|
| N reg 306 fuse guide | 28 Mar 2006 17:20 GMT | 1 |
not sure if anyone can help i have a pug 306 n reg 1.4 and when i bought it i didnt get the manuel, now some of the fuses need replacing only i dont want to start pulling fuses out left right and centre as we have a keypad imboliser in there and dont know the factory default code
|
| 206 glx Break light doesnt work with new bulb?? | 27 Mar 2006 19:20 GMT | 2 |
My right brake light has gone off but when i have replaced it with a new bulb, (which i know works) it doesnt work? Can anyone help?
|
| That's it.. I'm off.. Ta-ra.. | 27 Mar 2006 18:32 GMT | 2 |
After five and a half years of Peugeot ownership, I'm off. I'm picking up a Skoda Fabia vRS tomorrow. Some final thoughts: I grew to love my 306DTurbo after a shaky start (mostly because it was
|
| flexible exhaust pipe. | 25 Mar 2006 13:41 GMT | 1 |
Hi All, I am a 1990, lhd, lwb, 9 str, pet, 2 ltr mitsubishi minibus imported from Germany. I need either a complete exhaust pipe, a back end, (after the cat converter) or the where-a-bouts of a flexible exhaust hose to assemble and insert to replace a very old and very worn original ...
|
| Entering radio code on 406 V6 Exec. | 25 Mar 2006 00:25 GMT | 5 |
I have an S-Reg V6 Peugeot 406 (1998 model). It recently had to go into the garage for repair after an accident, and for some reason they removed the battery - I really don't think they needed to, but anyway...
|
| free to good home - Haynes workshop manual 405 diesel | 24 Mar 2006 02:28 GMT | 1 |
I have the above manual available, for the cost of the postage, if anyone would like it please email me. thanks John
|
| 205 STDT Diesel Fuel Consumption | 22 Mar 2006 19:29 GMT | 1 |
Right I'm back............ I'm still only getting 42mpg, I've replaced the air filter, taken it for a blast with injector cleaner in (hardly any smoke).... My front brakes seemed to be not releasing properly from the discs, as
|
| Peugeot 306 overheating | 22 Mar 2006 12:59 GMT | 6 |
Got an 'S' reg, Petrol Peugeot 306 Meridian 1.4 with about 38,000 on the clock. Usually only used for 3 mile trips to work and back (so just about gets up to operating temperature, 90C when I pull into the car park). Took it on a few long journeys recently and when the engine is ...
|
| 205 grd diesel erratic starting /stalling when idling | 22 Mar 2006 11:59 GMT | 3 |
MY much loved 205 grd diesel J reg(1992) has just developing a problem. Cold starts poor, wait for preheat light to extinguish but takes 2-attempts to fire engine -was always instant start of first attempt. OK no bit deal !
|
| 406 hdi bosch fuel pump | 22 Mar 2006 10:42 GMT | 3 |
Have a 2000 406 hdi 110 and have been suffering from the usual sticking pump. Cheapest place i have found is german and sweedish @ nearly £150 inc vat. Anyone know anywhere cheaper?
|