| Thread | Last Post | Replies |
|
| 307 HDI clunk rattle in back end ? | 18 Apr 2006 00:57 GMT | 1 |
Hi , My 2ltr Hdi 307 5 door hatch 3 year old, has developed a niggling rattle clunk ,when on uneven roads. I have checked the obvious Exhaust Wheel bearings/nut,spare wheel arrangment etc but this one evades me,Possibillities are now the rear
|
| 406 diesel turbo | 17 Apr 2006 23:13 GMT | 2 |
everything was running fine until the other day, the car started fine as usual and ran perfectly for about 30sec and then developed a very loud knocking noise (sounds like its coming from no 1 cylinder area). the car still drives as it should(done 127k) with no lack of power just
|
| Peugeot 406 2.1 Diesel Anciliary Belt Tensioner | 17 Apr 2006 22:56 GMT | 2 |
Has anyone changed the anciliary belt tensioner on a 406 2.1 diesel with aircon, mine looks buggered and I'm just wondering if it's worth trying to chenge myself. MT
|
| cap | 16 Apr 2006 19:32 GMT | 3 |
Hi Group. Dos anybody know what pressure a rad cap is for a pug 405 1992 1,9 diesel.i have found one in my shed it is a 13lb one and it is still in its box sealed.from chris Addlestone
|
| 206CC window question | 15 Apr 2006 23:51 GMT | 3 |
Daughter is plagued with leaking windows on her 206CC. Dealer has 'fixed' it at least 3 times but still the same. The windows appear to 'click' into the rubber seal when the doors are closed and sometimes they don't actually go in!
|
| Peugeot 306 DTurbo - intermittent starter fault | 15 Apr 2006 22:24 GMT | 6 |
Had a series of problems with my 306 DTurbo (1995 3 door).... For some time now I've not used the alarm due to it randomly going off. Around that time I also experienced indicators sticking on after alarm de-activation? Still use key fob for locking though.
|
| 406 stop alert | 15 Apr 2006 15:38 GMT | 7 |
A fault has developed on my 406 hdi that makes the STOP light flash and the beeper to sound whenever the a/c is switched on. Also a message appears"Engine temperature too high". This can happen even when the engine is cold. The temperature sensor has been changed but this makes
|
| oil | 15 Apr 2006 15:28 GMT | 3 |
Hi Group. Has anybody used Fully Synthetic in a Diesel engine? i would only use this oil in petrol engines only.so please reply. if u have used it and the diesel engine is still running.
|
| Fitting power steering | 13 Apr 2006 15:04 GMT | 4 |
Can anyone help. My son has a Peugeot 205 without power steering. Is it possible to fit and what are the likely costs involved. Kind regards
|
| Central Locking/Deadlocking/Alarm Peugeot 406 | 13 Apr 2006 09:58 GMT | 2 |
Anyone out there got a problem with drivers door lock on 2001 Pug 406 executive,the central display unit in the middle is saying the drivers door is open,when its closed securely all the interior lights stay on even with engine running and when you close the doors to ...
|
| Aftermarket radio installation, memory problems | 12 Apr 2006 01:29 GMT | 1 |
I have a v reg 206 and recently attempted to install a 'ministry of sound' cd player. The 206 had three iso connections, i presume one for speakers,one for power etc and one for stalk control. I simply disconnected the standard radio an plugged in my new one leaving the
|
| 1.4 HDI Oil type | 12 Apr 2006 00:30 GMT | 1 |
I have a 2002 1.4 206 HDI that is to be serviced soon and am a little confused about which type of oil it uses. In the owners manual there is a list of various recommended oils by esso, total, etc.. however at the bottom in the small print it says "DO NOT USE SYNTHETIC BASED OIL
|
| Peugeot 406 Auxiliary Belt | 09 Apr 2006 20:46 GMT | 1 |
Just had to repalce the auxiliary belt for the second time on my 406 diesel. Started it up in work again the other day and it started making some noises and on looking I noticed that the belt had moved over towards the engine again and was rubbing against the engine.
|
| bulbs | 09 Apr 2006 08:32 GMT | 2 |
Hi is it possible to remove the display bulb for the fuel gauge with out removing all the dash.(405 deisel 1992)
|
| 307SW - clicking while turning steering wheel | 08 Apr 2006 02:37 GMT | 2 |
It's diesel, 307SW, 5.000 miles only. When I am turning steering wheel, I hear and feel a kind of clicking noise every 360 degrees of steering wheel turn, no matter if turned clock-wise or in opposite direction.
|