| Thread | Last Post | Replies |
|
| Fitting Cruise Control to 307 D-Turbo | 31 May 2006 22:56 GMT | 15 |
I have a late 2002, Peugeot 307 D-Turbo, but it wasn't fitted with cruise control at birth. I am enquiring at my local dealer if it is possible to fit it, I've been told yes it is, but they are really dragging their heals about giving me a cost and date to fit.
|
| 406 Cam Belt Replacement | 31 May 2006 09:01 GMT | 4 |
I'm getting conflicting advice from garages over the replacement period for a cam belt. Car: Year 2001, 406 Estate, Auto 2.0 litre Petrol Mileage 33,000 (53,000 km)
|
| Peugeot 307 | 30 May 2006 19:14 GMT | 1 |
ðÐÒÉ×ÅÔ. á ÅÓÔØ ÌÉ ËÔÏ ÉÚ òÏÓÓÉÉ?
|
| Peugeot 205 1.6 Gti Diagnostic plug | 30 May 2006 17:54 GMT | 4 |
Does anyone know where the green 2 pin diagnostic plug on XU5 engine is I've looked all round the engine compartment but still can't find it? Thx Andy
|
| 205 Central Locking Module Location ?? | 30 May 2006 14:18 GMT | 5 |
Does anyone know where the Central Locking Control box is located on a 205 XR ? My daughter has just bought her first car, a pug 205 XR H reg and I know its got
|
| RE: 309 Wiring Diagram | 29 May 2006 23:25 GMT | 3 |
Does anyone have a wiring diagram they could send me? thanks
|
| Electrics stay on with key out | 29 May 2006 14:02 GMT | 2 |
Here's a headscratcher (for me). Peugeot 405 GT TD estate. All the electrics stay on, even with the ignition key out. I had to disconnect the battery until I had time to take it to garage.
|
| 306 Mark1 or 2? | 29 May 2006 09:50 GMT | 3 |
My car is a 306 1997 model, is there an easy way to tell whether its the Mark 1 or the Mark 2? (I believe this was the year there was a slight body shape change) TIA
|
| dash removal | 28 May 2006 11:59 GMT | 2 |
i am having great difficulty in removing the dash from my pug 306 diesel 94, i cant seem to find the retainers (bolts or swcrews) that hold the dash in place, i've been told to look in the engine, by the pedals the steering wheels etc by cant seem to get a deffinate answer on where ...
|
| 406 handbarke adjustment | 27 May 2006 11:41 GMT | 2 |
Hi all, anyone got any ideas how to adjust up my handbrake on my 1999 406?i have looked about for adjuster but cant see one? thanks in advance.
|
| 406 2 litre misfire | 26 May 2006 12:44 GMT | 3 |
My 406 1999 T reg executive (non turbo) has a slight misfire, this only occurs at 2000 rpm (any gear) the car has 82K on the clock and has full service history my local garage are at a loss (non dealer but with full diagnostics)
|
| 206 (2004) - ABS pump failed!! | 26 May 2006 10:37 GMT | 2 |
Having alot of problems with my peugeot 206 S (2004) it began with the ABS light, brake light and STOP lights staying on while driving and then a day later the car wouldnt start. So far we have found the ABS pump is burned out and needs to be replaced but we cant find out why
|
| Converting 405 from automatic to manual transmission | 26 May 2006 10:20 GMT | 4 |
I have a 1996 405 (2000) that I am trying to convert to manual transmission. I've worked on the automatic transmission about 4 times now, and it keeps going out after a few months. It's like finding gold, getting a new 405 transmission in Jamaica, so I'm think of going
|
| 306 electric window | 25 May 2006 22:15 GMT | 4 |
on my 306 passenger side electric window my window will only operate down and not up, i have checked the relays/fuses, and i can only operate it down on the passenger side,i get nothing on the drivers side,i have bought a brand new switch and this is still not rectifying the problem ...
|
| Antipollution fault - 307 sw 2.0 HDI 2004. | 25 May 2006 20:26 GMT | 2 |
yesterday, while i was driving control ligh for motor switch on, with signal beep, on display was message: Antipollution fault. It seems to me car doesnt have full power and temperature indicator is on 90 Celsius.
|