the sensor in the bell housing keeps getting damaged. Has anybody out there
any idea what may be causing the problem

All the locks bounce open when trying to lock the car, have shorted this
auto-unlock feature on a 306 before but cant find the unit on the 206. Any
help appreciated
Andy B

Replaced the lambda sensor on son's 306 XSi this afternoon as Pug
dealer said it was showing a fault code. Wiring was exactly the same
colours so no problem there and it came out fairly easily ! Problem is
that the engine management light is still on and it idles roughly

Hi People
  306d ........engine blew up some months ago due to broken belt just after
I bought the car, 575 miles to be exact...anyway the problem is I got a
newish engine 44k on it, it's fine runs well, but it just doesn't have the

Tying to put a towbar on a 205. Anyone know the colour code for the
left hand indicator lookng from the rear?
cheers,
      Len

Can anyone give me a rough estimate of what I can expect to pay for a front
wheel baring to be fixed in a garage? Thanks for any advice.

Typically with today being the real first warm day I decided to put
the a/c on in my 2001 306. No cold air like last year at all! Does
this mean it needs recharging and if so what's the likely cost?
TIA

Hallo ik heb een Peugeot Partner en het lampje voor de aanduiding van mijn
verlichting is stuk en die wil ik graag vervangen, heeft iemand een idee hoe
ik daar bij kan komen.
bij voorbaat dank zeggend,

beschränkt euch mal auf das wesentliche.wer soll alle eure romane bis zum  
ende lesen!

Be for I change my radiator are there any pit falls I will have to look out for?
Any Tips please !!
--
wwrxb02

Hi just put my 406 HDi 51 plate 132K into pug dealer for service. They
just phoned and told me back box on exhast has a hole in it, but it is
the part that has the cat converter inside - quoted me 700
pounds.....any advice on  price would be appreciated because it seems a

I have seen many references to this  valve, and the fact that if disabled,
can improve fuel consumption considerably.
Does anyone know if this is also true on the HDI (in my case a 110 in a
307SW), or does the computer get its knickers in a twist?

Got a replacement lambda sensor for son's 95 XSi but am a bit puzzled
on the colours? it's got 2 white, 1 grey and 1 black wire. Are these
going to be a one for one swap for the old one or do I have to somehow
match the existing colours to these ?

My lad has been told the lambda sensor has failed on his 1995 Xsi.
Anyone know if this a standard 4 wire sensor? Been quoted £95 from Pug
but there are some on Ebay for a hell of lot less. How easy is it to
replace this?

Hello,  I wonder is anyone has encountered this problem on a 406
When I started my car this morning it refuses to idle, the engine revs dip a
couple of times and then drop to nothing and the engine cut out.  Here's the
very odd thing..  when the engine was running, the speedo was ...