After numerous visits to numerous garages no-one can see anything unusual
about my car. It has, for a while now, and getting worse - developed a
hideous squieeling sound whilst driving, turning, coming from the front
undercarriage "somewhere?" -= oddly enough when I place my foot ...

have a 2001 206, and the driver door is getting very difficult to shut
- sounds like metal on metal as it crunches back from fully open. Any
idea where to start without taking the door off - or does it come off
easily?

I need one of the plastic housings for my 205gti's driving lamps.
The lamps are SIEM.
Is this available aftermarket, or is it a dealer-only part?
TIA

Running 406 -2 litre Hdi 90 Rapier Estate- registered 2001, with 62,000
miles and no problems, in fact very happy. May even be very,very happy but
somehow feel that Michelin Energy tyres (all round) have been a
disappointment . After 21,000 miles the front tyres are overdue for ...

Having found this link http://www.crushmy307.co.uk/ makes interesting
reading. Go read the saga this guy has experienced at the hands of Pug
UK.
joss

I'm renewing the head gasket on my 1993 605, driven 190000 km. It's got a
XU10J2Z engine. (2 litre injection).
The cam belt is overdue, so it will also be replaced.
I'm also thinking about renewing the water pump, as it is the original, and

YOU DO NOT WANT TO SKIP BY, PASS OVER, OR LET THIS ONE GET AWAY YOU
GUYS.  READ THIS, FOLLOW IT EXACTLY, AND SERIOUSLY, YOU ARE GOING TO
GET PAID! That's all there is to it.
THIS IS THE FASTEST, EASIEST PROGRAM YOU WILL EVER DO!!!

Hi, cheers to those who recommended Nexxia, turned out to be cheaper and way
quicker to order through them than to visit Halfords - only a £1 cheaper but
about 5 days less waiting time.
Unit installed and steering controls working fine.

Gents
I am getting a squeak from the rear suspension top arm bush drivers side
when the vehicle moves. I have examines the bush using a tyre leaver and
there is no movement just the squeak. Is there any thing I can use to

Does anyone know how easy it is to change a turbo on a P reg 306 D
Turbo?
Is it possible to take it from the bottom of the car or would I need to
remove the engine?

Just a quick question about the clutch on my 406.
Far too often at the moment I'm finding it difficult to engage second when
changing down. I press in the clutch, come out of gear just dandy
(anywhere between 2k and 4k rpm) and be unable to engage second without

Hi Group.
        Got asked today by some one that dont work on cars how long
would it take them to replace a rear engine mount on a 405, told them
about 2hr max,dos anybody think this is over the top or about right?

I have just purchased a secondhand witter towbar & electrics. I have
downloaded fitting instructions from Witter for the towbar but need
help with electrics which have a relay/unit of some sort which has SB2
from rydertowing on the case. plus the plug with the wires cut off. I

I assume i've got to pull the injectors out to do this but i'm a bit
sceptical since I dont want to disturb the metal pipes.
I'm sure you'll ask why - really just a bit of a health check but also
it is not getting the MPG I think it could get - gets 40 driven v e r y

Ive a 106 XND thats giving me grief...
the engine starts first time, idles fine and generally seems ok on the
drive. but it has no power when driven. any ideas? it makes knocking
sounds under load,and is a bit smokey. It was losing water, but that