I`ve read this group about the potential problem but all I come accross
is that it is a bulb fault.
Surely it is not. The lights working fine. Is it a fuse? The digital
display is completly dead. Any help please TIA. It`s an X reg 206.

Hi my wife has a 307 rapier on a 51 plate and the heater has stopped
working, does anyone know how you get to this unit and remove/replace
the fan/blower  unit
thank you

The car is in a car park, but its not one thats open 24hours a day.
I've managed to persuade security to ive me at lest until the end of
today before they clamp or take it away.
Ive lost the keys and dont have a replacement and I'm not sure what to

Bought a 1998 406 with alloys. Come to change a wheel and find that the
adaptor is missing for the locking nut. Seller can't help. Does anyone know
how to get the nuts off without the special tool or can I get a tool from
somewhere?

I've had a very small oil drip for a while now, cannot say exactly where
from...engine or gear box side. Just recently I've noticed a constant whine,
seems transmission as it continues when I coast out of gear. Thought I'd
check the gear box oil level but for the life of me I ...

My 1996 Peugeot 205 Diesel has started to play up on long journeys.
Twice now having completed long journeys and then stopping at petrol
stations the engine fails to even turn over let alone start. All the
lights on the dash come on and then I turn the key and they all go off

I have a 205 CJ (1.4TU3M). Have recently had problems with the
immobiliser. The fitter came and bridged it and tried jump starting....
it started but then stopped and no power whatsoever.
We put jump leads on it, but the jump leads caught fire!! The positive

Where can you buy exhaust pipes and silencer's for 406 Coupe's other than main dealer.
TIA Julian

Hello Peeps,
April 2004 307 HDi DT went in for its 24000 mile service while I was working
abroad.
All very professionally handled by local dealer with car picked up from home

Where do I start?
2 weeks ago I bought an L reg 306 for £525 and that weekend I got
stuck in traffic and had a problem with the wiring for the fan. In
short, the fuse for the fan kept on blowing every time the fan kicked

I have been having some problems with my Peugeot 406. The indicator
keeps telling me oftentimes that the engine is too high. We have tried
several options to discover the fault but no solution. Unfortunately,
the manual that came with the car is wrtten in French & i dont speak or

i have a peugeot 306 1994,  all the idicators flash when i indicate, i have
changed the indicator stalk, changed the relay,but still the same, can
enybody help    thanks

Well i got a rear engine mount bush out without a press.removed the
center then cut down with hacksaw blade then cut it away with chisel
.all have to do now is keep it in my shed ready till some one may ask
for one.(ihave marked the way the bush gos in)it is for a pug 405 1992.

I have recently noticed my 406 (2.0 HDi, yr 2002, 90bhp) making a deep
"moaning" sound.
My first suspicions was a warn drivebelt and so I replaced this.  The
problem was not solved.

I have bought some "Radweld" to put into my radiator to try and repair
a small leak. I need it to circulate around the radiator and wonder if,
by putting it in the coolant tank, this will happen.
The chap in the shop said that some coolant tanks circulate while