Home | Contact Us | FAQ | Search & Site Map | Link to Us
Sign In | Join | Other 45 Sites in Network
HomeAnnouncements
Discussion Groups
By Brand
BMWChevroletDodgeFordGMHondaLexusMercedes-BenzNissanPeugeotToyotaVolkswagenOther Brands
By Topic
4x4 CarsRVsDrivingMaintenance & RepairCar AudioCollectible Cars
Country Specific
Australian ForumsUK Forums
ArticlesAuto InsuranceBuyingCars & TechnologyMaintenanceMiscellaneousSafety
DMV Resources
Related Topics
MotorcyclesBoatsMore Topics ...

Car Forum / Peugeot Cars / August 2006

Tip: Looking for answers? Try searching our database.

ThreadLast Post  Replies
how do a sort the timing on my pug 106?12 Aug 2006 17:03 GMT1
i have just changed the head gasket on my 106 1.1xr 1993 and now i
need to know the timins settings can sum1 help me plz asap as at the
moment i have no car  :cry:
Fuel Pump Noise?12 Aug 2006 16:59 GMT1
I've got a 306 1.4 meridian and when i turn the key i hear a kinda
'whirring' noise for a few seconds, which i think is the fuel pump
kicking in, and then it goes. But now when i start the engine i get the
noise constantly and its quite load. Does anyone know whether it is the
I need help!12 Aug 2006 16:27 GMT1
I just bought my first car ever. It is Peugeot 206 gti.
Now I am seeking some answers about the "drivecomputer"?
What is it capable to do and what it should show to you during the
ride?
Peugeot 307 Transmission failure11 Aug 2006 12:27 GMT12
TO ALL 307 OWNERS HAVE YOU EXPERIENCED FAILURE OF YOUR TRANSMISSION
WITHIN 110,000 or in 3 years? I have!!!!
I had to write the following message (excerpt shown below) to Peugeot
Citroen Automoniles UK which I believe is the headquarters for Peugeot
3.0 V6 406 rough idle09 Aug 2006 15:51 GMT6
I have a 3.0 V6 and have been trying to chase down why it would not idle
smoothly, it intermittently (every ~10 seconds) fluctuates  by about +/-
300rpm.
I have changed:
106 XND wont move!09 Aug 2006 10:37 GMT4
Hi, I tried to pull away this morning and my car wont move.  The front end
seems to start to pull away (making the rear of the car dip) but it just
wont budge.  
 I havent moved the car in just over a week and the weather has been
106 XND knocking sound....08 Aug 2006 18:42 GMT6
I have a 1.5 XND Diesel (105,000 miles).
The car runs fine until it warms up (after 10 mins or so) and
then there is a knocking sound from the engine as i accelerate in
1st and second gear only. The knocking disappears after a couple of
106 XND  Wont move08 Aug 2006 15:13 GMT3
Hi, I tried to pull away this morning and my car wont move.  The front end
seems to start to pull away (making the rear of the car dip) but it just
wont budge.  
 I haven’t moved the car in just over a week and the weather has been
2002 Peugeot Clarion CD unit07 Aug 2006 13:19 GMT1
I recently have bought a 2002 Peugeot ST equiped with the Clarion CD
unit and
JBL loudspeakers.
I want to install a Nokia handsfree kit in it and I'd like to use the
106 Cambelt replacement07 Aug 2006 00:53 GMT2
I want to change my cambelt on my 106 1.1 8 valve Independence.
My question is in the Haynes Manual  it says that I need to use a
special tool (seem something) It says that this must be used and if not
to check the new belt with a Peugeot Agent. The Auto data manual says
ABS fault light intermittently flashing - 60505 Aug 2006 19:32 GMT3
For a few weeks the ABS light on the dashboard has been flashing
intermittently, but a few days ago came on and now won't go out.  The car
brakes perfectly ok but I assume the ABS doesn't work, but haven't found
that out yet.
306 will not start and all electrics have gone05 Aug 2006 15:37 GMT5
Please help with my problem.
This is gonna be quite long so bear with me.
I have a 1997 306lx 1.4i. I took it to my local tyre and exhaust garage
for a new middle box and 2 new front tyres. I left it with them for the
205 GTi advice.04 Aug 2006 21:56 GMT3
I have a 1998 205GTi. (78,000 miles)
According to my garage the head gasket has blown causing an oil leak to the
rear of the engine and it's not really economic to repair.
The car still drives well.
Diesel Injector Question04 Aug 2006 14:03 GMT8
I have a quick injector question:
I have pulled the injectors from my 1.4 XND and looking at them they
seem very worn. there is a pip in the middle, I think it should lok
like an inverted cone, but is parrallel sided.
Headlight adjustment 306?03 Aug 2006 20:03 GMT9
Anyone know of a link which will show me how to adjust the headlightts
on an M reg 306Xsi? Failed the MOT but just needs adjustment so they
tell me.
TIA
Pages: 1 2 3 4 5 July, 2006
 
Sign In
Join
My Latest Posts
My Monitored Threads
My Blog
My Photo Gallery
My Profile
My Homepage

Start New Thread



©2008 Advenet LLC   Privacy Policy - Terms of Use
This website includes both content owned or controlled by Advenet as well as content owned or controlled by third parties.