Home | Contact Us | FAQ | Search & Site Map | Link to Us
Sign In | Join | Other 45 Sites in Network
HomeAnnouncements
Discussion Groups
By Brand
BMWChevroletDodgeFordGMHondaLexusMercedes-BenzNissanPeugeotToyotaVolkswagenOther Brands
By Topic
4x4 CarsRVsDrivingMaintenance & RepairCar AudioCollectible Cars
Country Specific
Australian ForumsUK Forums
ArticlesAuto InsuranceBuyingCars & TechnologyMaintenanceMiscellaneousSafety
DMV Resources
Related Topics
MotorcyclesBoatsMore Topics ...

Car Forum / Peugeot Cars / September 2006

Tip: Looking for answers? Try searching our database.

ThreadLast Post  Replies
Help wanted with 1999 30618 Sep 2006 17:57 GMT2
I've had some battery problems lately... and the long and short of it
is that I've locked up the audio system (the 3035 one) -  the manual
says I'll be given another chance to enter the correct code - which I
have - after an hour of running. Tried that, but nothing happens.
206 Brake Lights not /all/ working18 Sep 2006 16:47 GMT2
My son has a '99 206 and the other day I noiced that the n/s brake
light was not working. A few days later, before I could get out to buy
a replacememnt bulb I noticed that neither of the main brake lights
were working (high level one is OK). Got two new bulbs and went to fit
peug engines18 Sep 2006 12:42 GMT1
could anyone tell me if you can fit a 1994 peug td engine and gearbox into a
peug 206 2001
406 diesel turbo ignition problems17 Sep 2006 15:02 GMT3
Hi, Apologise for re-posting this, but I didn't get any response first
time round?
I've just returned from a trip tp South of France, and since I've got
back I've noticed a problem with the glow plug light taking longer than
406 brake pad change14 Sep 2006 22:01 GMT1
Hi, I'm going to be changing  the front pads on my 406 this afternoon. It's
the 1.9 td, 96 model, with the pad wear sensors. Just wondered if anyone has
done this recently and would have any tips or things I should watch out for
when doing this.
Peugeot 309 Style 'STOP' Light issue14 Sep 2006 18:06 GMT2
I just bought a Peugeot 309 Style (1.4) as my first car. Runs fine,
just had a new MOT put on it past with an advisory for the wheels which
are getting changed tomorrow anyway...
But, After a short drive the 'STOP' light comes on, and without a
Which engine for a Talbot Express 1.9 diesel?13 Sep 2006 22:58 GMT1
I've a 1984 Talbot Express Autosleeper camper fitted with a 1.9 diesel
(non-turbo)
from a 1992 van.  Unfortunately, the darned thing overheated and I'm
looking for a replacement engine.  I've been told this is a 1.9 Peugeot
406 Air Con Relay13 Sep 2006 21:35 GMT2
Does anyone know where the relay for the air con on a 406 is ?.
Cheers
Dave
Stepper Motor Problem?13 Sep 2006 17:58 GMT1
I had problems with my Peugeot 306 stepper motor revving to 3k and
have done everything suggested but to no avail. I therefore decided to
replace it and it went ok for a few days. Butd now it has gone the
other way and does not idle at all. It cuts out whenever I use the
peugeot 205 diesel overheating at speed13 Sep 2006 13:00 GMT3
I have a peugeot 205 diesel, It only overheats (red temperature light
comes on) when I am in fifth gear and driving over 70 miles an hour or
when I am in fifth gear and driving up a hill where I need to have the
accelerator peddle pressed to the floor to keep the speed at 60. The
306 dturbo gearboxes12 Sep 2006 17:35 GMT8
After investigating a noisy gearbox on a 1994 L plate 306 dturbo we have
concluded its a noisy box and needs replacing.
Does anyone know if a box off a 1994 306 TD is the same, im wondering if the
standard models box is as strong and if the ratios are the same?
Speed pulse 206gti12 Sep 2006 09:27 GMT1
I just got a pioneer avic-x1 and I need to connect a wire to the speed
pulse on my car, does anybody know where this wire is located?
Thanks
Steve
Brake light problem on Peugeot 10612 Sep 2006 08:56 GMT1
Any ideas?
I have an R reg 106.  I recently replaced the offside brake light bulb.
Lights seem to work fine when the car is standing still and when the
side lights are off - but when the side lights are on and moving the
Stepper Motor12 Sep 2006 07:07 GMT3
I had problems with my Peugeot 306 stepper motor revving to 30k and
have done everything suggested but to no avail. I therefore decided to
replace it and it went ok for a few days. Butd now it has gone the
other way and does not idle at all. It cuts out whenever I use the
Fuel filter in Peugeot 206 X Reg (2000)11 Sep 2006 11:31 GMT2
Hi, I`ve had a quick look in the engine bay for the fuel filter of my
206 but can`t see it (unless it`s staring me in the face!). Where
exactly is it and is it simple to change?. Thanks
Pages: 1 2 3 4 August, 2006
 
Sign In
Join
My Latest Posts
My Monitored Threads
My Blog
My Photo Gallery
My Profile
My Homepage

Start New Thread



©2008 Advenet LLC   Privacy Policy - Terms of Use
This website includes both content owned or controlled by Advenet as well as content owned or controlled by third parties.