| Thread | Last Post | Replies |
|
| 306 Fuse | 24 Oct 2006 07:21 GMT | 2 |
1999 306 D Turbo - Does anyone know how I can identify which fuse is for the cigarette lighter, or even what size of fuse it is would be a help? TIA
|
| Sticking clutch pedal. | 23 Oct 2006 22:59 GMT | 2 |
I have got a Peugeot 406 lx hdi 2002 model and the clutch pedal is occasionally sticking down when pressed. It does not do this all of the time only once or twice a week. The only way to lift it back up again is to put your foot underneath it and lift it back up. I have looked
|
| 306 relay noise? | 23 Oct 2006 14:33 GMT | 2 |
Hi, just lately I have been aware of an occasional light drumming noise, only in short bursts, coming from somewhere near my right knee. It seems to happen around the time I use or have used my indicators, or sometimes when I am turning the steering wheel slightly. The ...
|
| 406 black smoke | 22 Oct 2006 20:47 GMT | 13 |
Hi My 406 2.1 diesel S reg. kicks out black smoke on acceleration be it light footed or heavy she constantly delivers black smoke.just had all filters changed and new injectors. anyone got any ideas as to what the problem could be,
|
| 406 Estate tyre pressures | 21 Oct 2006 20:27 GMT | 2 |
The sticker giving the tyre ressure is missing on my 406 - can someone please, please post them for the estate. (It's and HDi 2.0, V reg FWIW) Thanks Chris
|
| rev gauge update | 20 Oct 2006 16:26 GMT | 1 |
Well the partner van has been in to the dealer today to have the rev gauge looked at. It turns out that the gauge (behind the instrument panel) is faulty. So it needs to be replaced.
|
| How Heavy is the clutch on your Diesel Peugeot? | 20 Oct 2006 00:15 GMT | 6 |
I'm asking because mine is quite heavy - also I crunch gears because I get lazy and don't put enough effort in to fully depress the clutch. That is a 1995 TD 405 Also my 205 Diesel was the same - had to replace the clutch cable on
|
| Odd Noises | 19 Oct 2006 23:26 GMT | 1 |
There have been a lot of problems on here with strange noises from cars. It reminded me of an extract I once read from the drivers manual for the Model T Ford. It said: "If as you travel along your ears are assailed by a sound as of church
|
| 309 grinding/droning noise | 19 Oct 2006 15:00 GMT | 1 |
My 309 makes a dreadful grinding/droning noise from under the front end when driving. Sounds like a wheel bearing really on its final throws but its NOT them. Someone mentioned the intermediate bearing on the R/H driveshaft. Any ideas?
|
| 309 grinding/rumbling noise | 18 Oct 2006 18:43 GMT | 1 |
My 309 has a terribly loud grinding/rumbling noise coming from beneath the front when moving along. It sounds like its from the near side area but as noise travels it can also sound like the centre of the front too! Any ideas? I think it might be a front wheel bearing but ...
|
| What about my 406 brakes then??????? | 18 Oct 2006 08:40 GMT | 1 |
Hi can anyone help.? I have a 406 2.0l petrol executive turbo 1998. It doesn't get out much now but for some reason the brake pedal is now taking 10 seconds to return to normal position. Hence light staying on too long. One day
|
| Mystery Switch | 18 Oct 2006 08:35 GMT | 8 |
I have a 406 2.0 turbo exec, on the drivers side near the drivers knee there is a button that looks like it has a picture of a sensor or radar on it. Could anyone please tell me what it does if indeed anything. Thanks.
|
| 306 - squeaky wheel + Bosch caliper/pad instructions | 17 Oct 2006 18:47 GMT | 6 |
Our 306 (1998/S reg, 1.4l petrol) has developed a squeaky driver's side wheel. At various speeds (but most noticeable at lower speeds) you can hear a repetitive squeak which varies with road speed and occurs on each revolution. The squeak is often worse when the wheel is turned ...
|
| pug 1996 306 turbo problem | 17 Oct 2006 14:46 GMT | 3 |
hello can any help me with my 306 ,the turbo works (i can here it wer)but the boost dos not ,i cant see any thing ,ive been told its eletric but i dont no ,so can any body help me please
|
| 406 valve clearance | 17 Oct 2006 13:04 GMT | 12 |
Hi anyone know what the valve clearance should be on the 406 lx dl 2.1 1998 and what sort of job it is the ajust them respects gregg
|