| Thread | Last Post | Replies |
|
| 306 hdi just stopped working | 17 Feb 2007 18:11 GMT | 5 |
Hi all hope someone can help i have owned a 2001 306 hdi estate for 2 years and its never skipped a beat but went out last night in it
|
| 307 brake system problem. | 17 Feb 2007 17:51 GMT | 4 |
My 2001(51)307 2.0 hdi has recently started doing the following.Upon gentle braking and when coming to a stop(10mph) i think the abs is kicking in because i get a pulseating through the brake peddle and a wierd noise(same as when the abs does kick in)...it does not do it ...
|
| 407 SE "cinch" connector | 17 Feb 2007 15:23 GMT | 5 |
Does anyone know what the "cinch" connector in the armrest storage box is for? No mention of it in the owners manual
|
| 206cc brake light helppppp!! | 17 Feb 2007 09:47 GMT | 1 |
My brake lights are permantly on??!! Why is this?? What should I do... Is it easy enough to do myself?? Thanks
|
| 306 cab hood | 16 Feb 2007 13:00 GMT | 1 |
hi there,every time i try to use the hood it blows the fuse,any ideas anybody,cheers,savo
|
| 99 206 XS - Coil Pack | 16 Feb 2007 10:45 GMT | 2 |
Anyone know if the coil pack on a 1999 1.6 XS is a grey plug or a black plug? I could do with ordering one today but i cant goto the car to check? Any ideas? thanks
|
| pump | 15 Feb 2007 21:30 GMT | 6 |
Can any body tell me where the fuel pump is on a 106?(not for me )as the person cant get any fuel to the carb,found the filter on the rear end with the pipes but cant find the pump. any help would be helpful so i can pass info on.
|
| Whoever designed the 307 round an HDI | 15 Feb 2007 20:08 GMT | 2 |
engine should be strung up by their tender parts over a very high cliff. Changing the cam belt, taken most of today and I haven't got the belt off yet. Who thought of putting the bolt holding the top belt cover at the back, where you can just get you finget tips to and no more? Took ...
|
| 306 Estate | 15 Feb 2007 18:53 GMT | 2 |
I recently had a repair carried out to the rear N/S door but since its been done my back door is now leaving in water. can anyone tell me the best way to adjust the door as far as I can see the bottom needs to be brought in towards the door rubber
|
| 106 engine warning light | 15 Feb 2007 14:18 GMT | 4 |
My son took his M reg 106 (1.1 SKI - cheap, chereful no injection on anything) on its first long distance run today 250+ miles, normally just runs round town. About 200 miles out, he phones to say engine warning lamp (we think) is
|
| Low diesel additive warning light | 14 Feb 2007 23:57 GMT | 4 |
I have a 307 hdi estate 52 plate and a low diesel additive warning light has come on. Where and what do I fill it up with please, no mention in handbook. Thanks Clive.
|
| 406 window motor/reg fitting. | 14 Feb 2007 16:06 GMT | 9 |
I'm told my drivers side window motor/regulator needs replacing and have been quoted £250+ for the job including parts. (It looks like I can get hold of one from the scrappys for less than fifty quid.)
|
| Headlight problems- ’93 306 | 14 Feb 2007 15:14 GMT | 4 |
Just bought a 306, year 1993 but cant get the headlights working. The sidelights come on fine, but when i turn on the dips, nothing happens. Have checked all the fuses, has anyone experienced this problem before? The bulbs are fine too checked them also...
|
| 306 Auto no Idle | 14 Feb 2007 14:17 GMT | 5 |
Well my g/f seems to have a little problem with her N'Reg 1995 Peugeot 306 1.8 Auto, and wondered if anyone on here could help me solve the problem. The car has only done 41,000 miles from new and started to stall when she would slow down for traffic lights or junctions. Seeing ...
|
| Whirring noise from 406 Auto Gearbox when cold? | 14 Feb 2007 14:09 GMT | 1 |
I have a 1997 406 3.0 SE Coupe with auto box and just clocked-up 200k with no real problems until recently (but read on). Started to get a whirring noise when starting the engine which seems to be somehow related to the viscous clutch on the automatic gearbox.
|