We purchased our 307cc 2.0 petrol October 2006, Brand New.
A quick heads up for those considering this car, we have had the following
issues to date:
   -    Anti Roll Links needed replacing.  When this section broke it

I have just mounted an after market trailer hitch on my 2006 307 HDI (90hp)
stationcar.
Theres a cable for a little controlbox that needs 12V. From where do I pull
this?

Just recently my 307 2003 2.0lt petrol gave me an error which says
"Anti Pollution Malfunction".  It did it a couple of days ago, then
went away and yesterday again except this time it did it while I was
driving and there was a sudden loss of power from the engine and

Our 1998 (S reg) Peugeot 306 1.4l petrol has a bit of a history for
making tapping/knocking noises from the top part of the engine.  I've
always assumed it to be the tappets/hydraulic valve lifters.  It seems
worse at different times of the year (can't remember if worse in Winter ...

I have a '99 t-reg 306 diesel which is missing the remote fob, would
like to replace it but am unsure if i need an ir or rf fob.....can
anyone help? thanks, april.

How do I remove the rear brake drum to replace the brake shoes? Do I need to
remove the soft alloy cap in the centre of the drum, and then.... ?
Cheers :)

Hi, my 6 year old 206 glx 1.4cc  has just failed its test on the brake load
sensing valve linkage (seized). I know where it is and exactly what it's
for, but how is it best to free it up?

I need some help with my 106 quiksilver. i took my car into a garage to
have a wheel bearing changed. they changed it and i thought it had sorted
it out but it didnt so they put another one in but the wheel still
wobbling about a bit. i want to know what the problem is. thanks

I've searched everywhere online but haven't been ale to find teh tyre
pressures for the 2.0 peugeot 206cc so can anyone help me out?
cheers rob

this is for a 106 ralye s1. The factory tire was size 175/60 R14.
Getting hard to find and quite expensive these days. I was thinking of
switching to 175/65, which is offered in more variety. However, an
independent mechanic has advised me against it; he claims that the

This morning the fuse on the radio cassete blew (Mounted on the unit).
This is from a 206glx (2000 model), with the CD changer.
I replaced the fuse and the unit now seems to have power as I can eject the
CD cartridge, but the multifunction display still shows the radio and CDC as

  Got asked today if i could do a steering gaiter on a pug 405 with
power steering. i told the person that it is not very easy to do . the
thing i need to know am i wright or shall i have a go at it.or has
anybody done one with out any proplems.

Could anyone recommend the best tyres foe a 406 HDI 110 estate. Many thanks.
Bryan

I have a Y reg 206 and the dashboard dims as soon as I switch any lights
at all on as though the dimmer is set at minimum which it isn't.
Turning the dimmer makes no difference to the dashboard brightness.
Anyone had this and can tell me what's wrong or if I have a switch

I own a 2000 306 Break on which I had a towing hook installed around
october 2005.
Now I want to buy a small trailer with a rear fog light mounted, so I
need to know if the towing hook electrical 7 pin connector will cut the