Any good ideas on how to get rid of moisture build up in headlamps?  I
thought of blowing it out...but I don't want debris of any sort to get
stuck in there.  How about sucking it out with a vac?  Heat?  Leaving
the lamps on with the back cover open?  Any suggestions would be

Why is it so pricey for a crankshaft pulley.£91.71 is the best price i
have got.all it is is a pulley it dont do any thing just has a belt
running round it .cant cost that much to make now can it .(still
looking for a cheaper one and anybody that has got one in stock)

Is it me or is there no-one actually posting to this group? I have had
no new postings since June 29th. And I have checked on Google Groups
too and that is the same. Where is everybody???

Have just had my 406 fail the MOT on REAR brake uneven application,
could somebody explain what would be causing this. Would like to get it
sorted obviously so my car can pass.
Look forward to a reply (sensible if you would)

Had a look at my b/pulley and it is the rubber one in the middle. so
how long do these pulleys last ???

So why is it they make these pulleys with rubber in the middle of
them.i got told by a pug garage that mine was not the half rubber
pulley.it was only that some one said he will have a look for me that
he found it as i did not have time to look my self, i was to busy doing

The brakes on my wife's 53 plate 206 HDi have always squealed to some
extent, even from new. They quietened down a little when the pads were
first changed but now I have changed the discs and pads (both mintex)
the squealing is as bad as ever under light braking. Everything was

well is there still many people out there in surrey still on this
group??

Sur ma vieille tire de 25 ans, la vitre de la portière AG vient de tomber.
Je n'arrive pas à dégarnir l'habillage de la portière pour accéder au
mécanisme de levage ; la manivelle m'en empêche. Une idée pour
éventuellement fermer définitivement et condamner la vitre ??

Well i have tryed every thing i can think of .to stop this rattle but
it is still there has anybody got any idea what it could be. it is
coming from the main belt where the alternator is and the lolly pop
tensionor which has been replaced,and it is not the bottom pulley as

My daughters 206 Engine management light comes on after a few minutes but
the car seems to run fine, although the petrol consumption appears to have
increased.  Does anyone have any ideas?.
Thanks Keith.

Hi guys, i recenrlt brought a second hand 406 estate on an 02 plate, 2.0 Hdi.
got it home fine, noticed that the cigrette lighter wasnt working and changed
the fuse (didnt fix it) but in error i took out the SH (shunt) fuse, and the
stereo lost its settings, again no prob quick set ...

ik krijg continu de foutmeldingen storing esp/abs en storing
snelheidsregeling. Zodra het contact wordt uitgezet is het weg en staat het
niet in de foutenlijst, de garage kan niets vinden. na de foutmeldingen
werkt de cruise control niet, storing is pas over na opnieuw starten ...