I've got a 407 with pressure sensors on the tyres.  I had a tyre replaced
recently at a tyre dealer , and now the dashboard display comes up after a
few minutes running saying 'the tyre pressure(s) are not monitored. '
Talking to a parts dept they tell me the new sensor is £56 + ...

I have a right hand drive UK version Peugeot 407 with xenon lights &
will be going to France in October.
I read that high-intensity discharge (HID) or xenon headlights cannot
be adapted by applying an external mask.

Got a 2003 406 2L petrol estate with 45k on it. Would you recommend
servicing 20,000 miles after the previous one (as the book says) or when the
computer says? (It'll have done about 18,000 at that point)
Thanks

i have a 407 SW with electric seats / mirrors. is it possible to have the
memory function fitted/added  or is this option only available when built?
--
Message posted using http://www.talkaboutautos.com/group/alt.autos.peugeot/

We are mounting a web of ancient advertising (from the XIX century to the
80´s) and there is a a lost ofposters and badges that could interest you.
Tehere is ads about ebery subject (cars, drinks, mode, candy, bier,
politicals, trains, campaigns, arts, cinema... There are as 2000 ...

I've got a 207cc and have been pleased with it for a couple of months. The
THP 150 engine was initially quite powerful given it's only a 1.6 and the
boost threshold was about 1500rpm. From there on up the power was pretty
much linear.

first I want apologize for my poor english,
I have Peugeot 605 SV 3.0 12v from 1990 year, I suppose that I have
problem with engine sensors connectors, so I think about replace them
for brand new. Here is my question, where can I buy new connectors for

The speedo on my 2000 (X-reg) 2.0i 406 has suffered from occasionally
wobbling and temporarily dead symptoms for over a year now - however
last weekend it seems to have died completely. Phoned my local Peugeot
dealer to order the Speedo Interface box referred to in other posts

I bought a Peugeot 407 1.6HDi SE three weeks ago. Since then I have
returned to the car on two occasions only to get the symptoms of a
flat battery when attempting to start. On the first occasion the AA
used their power pack to start it. On the second occasion an obliging

Hello Group.
As 74 year old who doesn't crawl underneath cars any more, could anyone tell
me if the 02 plate 406 estate has separate parts to the exhaust system or is
it all in one piece. I have a slight blow and would like to get it fixed by

Well its done and the old one was ready to fall apart,took 45 mins from
start to finish,olny because i had a tool that removed the bolt from
bottom pulley with no problem.(cordless drill special )the only problem
i have at the moment is how do you get the right tension on the fan

Hi...
My own 2000 406 has suddenly lost both headlights on dipped beam -
both sidelights and full beam are working ok. Can anyone give an
indication as to what this might be?

When driving to work this morning at around 40mph my 306 Turbo Diesel just
stopped.  The fuel guage and speedo moved to 0, the radio stayed on, the
accelerator was unresponsive,the brakes seemed not to work and likewise the
steering was very heavy (if not locked)  I can't remember ...

Dont all say at last.   i have got the pulley. £77.43 plus vat and it
came from a pug garage, cant be bad ? all i got to do now is fit it
have made my self a puller just incase it dont fall off.so i am very
happy its about time hahahahaha catch you all later with up date.

My 406 HDI 2002 90 doesn't 'arf get through some headlamp bulbs (dipped
beam), one's gone again tonight - I replaced the pair six months ago.
Is this normal? I've had other cars for years and not had to change the
bulbs.