| Thread | Last Post | Replies |
|
| Positive Terminal Adaptor ? | 29 Jun 2008 11:28 GMT | 3 |
Ive replaced the battery in my peugeot 306 diesel. However ive lost the screw adaptor thing from the old battery that affixes onto the positive terminal which allows the cars wires to be screwed onto. My question is what is this threaded ring that fits over the batterys
|
| cam belt problem | 28 Jun 2008 16:00 GMT | 2 |
I have a 2004, 307sw, 110HDi ,Diesel with 90K on the clock. The cam belt snapped when going about 60mph the other day and when the car came to a stop all the coolant had also drained out at the same time. Doe this occurrence at this speed always end up in a very expensive repair? ...
|
| 406 Rapier Estate ( June 2001) 2 litre Hdi diesel @ 80,000 miles. | 26 Jun 2008 21:28 GMT | 3 |
Can someone advise what drive belt(s) are fitted on above, what they drive and when they are scheduled for replacement. Cost of changing would also be of help. Many thanks,
|
| PEUGEOT 406 1.9 LX DT 1998 | 26 Jun 2008 21:25 GMT | 24 |
hi there just serviced my car but i don't know where the diesel fuel filter is located can anyone please guide me ??? thanks :)
|
| USB/Bluetooth for Radio Clarion RD3 (Peugeot 206 JBL) | 25 Jun 2008 19:24 GMT | 1 |
I'd like to fit my Peugeot 206 with a USB/MP3 interface which simulates a CD changer. An example for such an interface is the Xcarlink from Conexx (sorry, all links lead to German sites):
|
| I'm trying to find information on an automobile from 50s or 60s, I think French manufactured but not positive. | 24 Jun 2008 03:50 GMT | 4 |
I saw this automobile in the late 60s or early 70s in the States. It was unusual enough that I walked over and talked to the driver as he was putting gas in it. It resembled a dune buggy like those built on VW chassis's with
|
| 306 1.9D - Brake Servo Replacement? | 23 Jun 2008 13:04 GMT | 6 |
Has anyone had to replace the brake servo on a 306 1998 model? I hav seen from other postings that it has 4 bolts securing it to th bulkhead and that these may require access from the underside of th dashboard.
|
| Peugoet 306 Battery Terminals | 23 Jun 2008 09:37 GMT | 5 |
Hi, I'm really hoping that someone knows what I'm talking about... I've had to replace the battery on my 1999 306 XSI. The factory connector, on the end of the positive lead, is a large circular connector, about an inch in diameter. On top of the battery's
|
| PEUGEOT 406 1.9 LX DT 1998 DASH LIGHTS | 21 Jun 2008 17:17 GMT | 3 |
hi does anyone know if the clock that tells u the mileage has a bulb i can only see the mileage the car has done in daylight but night time with lights on i can't see any and whats involved how hard to change the bulb for it
|
| pug 106 starting problem!!! | 18 Jun 2008 01:10 GMT | 1 |
i have a p reg peugeot 106 and i am having intermitant starting problems with it. 90% of the time the car starts first time without any problem, but, on occasions, once i have entered the 4 digit security code and try to start the car i get no response. the ignition
|
| 406 glx 2.0 antipollution fault | 18 Jun 2008 01:05 GMT | 1 |
Hi, just wondering if anyone can help. I have a 406 glx 2.0 petrol estate 2001 (Y plate). Last night when driving home from work the engine management light came on and i got a message saying 'antipollution fault'.
|
| 306 Pollen Filter? | 18 Jun 2008 01:03 GMT | 4 |
I have a 1999 1.8 306 Does anyone know if this car has a pollen filter? The local garage claims this car should have one but Peugeot says it doesn't . I'm having problems with not enough air blowing through vents when aircon is on.
|
| 306 1.9 DT Head Gasket Replacement | 18 Jun 2008 01:00 GMT | 7 |
Started another job that needed doing. Have stripped the engine down and got to the head & manifold bolts to remove... Simple question, whats the size?
|
| starter motor | 16 Jun 2008 19:04 GMT | 2 |
Keith.or anybody else that might know. Can you give me that e,mail place again for starter motors down in southapton or was it bognor regis.thanks chris
|
| 306 head gasket failure | 16 Jun 2008 09:42 GMT | 4 |
Hi all, just had the wife's 306 radiator replaced, and the garage pointed out that there was oil in the water (and vice versa). They reckon it would cost about £600 to replace the gasket. I've already this year forked out £300 getting it through the MOT, £300 on a new clutch,
|