| Thread | Last Post | Replies |
|
| 205 1.1 Compression problem | 31 Jul 2008 19:05 GMT | 3 |
I just bought a really tidy 36,000 mile G-reg 205 1.1 (TU engine) for a very low price, because the cambelt had gone. I've had the head off and replaced all the exhaust valves, plus two of the inlets. All the valves ground in nicely and I crack-tested the
|
| Well I'll Go To The Foot Of Our Stairs... | 26 Jul 2008 19:09 GMT | 14 |
No posts for days and then a bloody Spam pops up. Would you Adam and Eve it.
 Signature Keith W
|
| price | 23 Jul 2008 23:27 GMT | 1 |
At last the price of diesel and petrol has come down , in morrisons in woking it is 129 lt.and addlestone tescos still 131.lt so it is coming down,
|
| Exhaust particle filters. | 20 Jul 2008 12:51 GMT | 2 |
I see the Euro Car Parts are now doing thir own copy of the original unit. As far as I can tell, they only do the later type with the split box bolting up on the gasket, but the new cost is £175, well under half the Peugeot price.
|
| Ping Rachet | 16 Jul 2008 21:29 GMT | 8 |
Hi Ratchet. I topped up the 406 today, first time since putting in the Super Diesel and returned 45.5 mpg just 1.3 mpg better than the standard stuff, not a lot but I reckon it works out slightly cheaper, however the improved performance has
|
| New ping Ratchet | 16 Jul 2008 16:49 GMT | 1 |
Sorry Ken I made a mistake, it wasn't Tesco's, it was the Shell Garage next door that keeps the fuel. I reckon my 75 years is catching up on me. However it is still good stuff and I shall continue using it. Bryan ( Winchester )
|
| nice | 15 Jul 2008 17:14 GMT | 4 |
It is nice having a few days off from work sitting back and doing what you want todo,
|
| 405 estate - internal Dimensions | 15 Jul 2008 13:57 GMT | 9 |
Does anybody have to hand the internal dimensions of the estate area of 1993 405 estate. In particular maximum height, width and depth (ok, there isn't anything else!).
|
| Looking for 307SW HDI Manual pref Haynes | 14 Jul 2008 12:55 GMT | 2 |
|
| 307 cam belt problem quote | 13 Jul 2008 23:21 GMT | 2 |
I have a 2004, 307sw, 110HDi ,Diesel with 90K on the clock. The cam belt went the other day causing a little bit of damage. I have had an 'estimate' for the work and the most expensive thing on the list (except for the labour at about £700) is the valvelifters. I need 16 of these ...
|
| car tax | 13 Jul 2008 10:15 GMT | 11 |
Did i hear right that the bloody goverment are putting car tax up. what was said on 10pm news.i wish some one would bomb that waste of space .
|
| 407 RD4 Audio Unit Bluetooth Pairing | 10 Jul 2008 19:57 GMT | 4 |
I've just got myself a 2008 407. It has fitted the RD4 Audio System. All very nice. The manual implies I can use the RD4/Car itself as a bluetooth handsfree unit for a mobile phone. I've entered the RD4 mobile phone pairing menu. It shows no devices are
|
| Engine number location | 08 Jul 2008 12:17 GMT | 3 |
Moving on from the post about the replacement head. Had fitted a replacement gasket and put the car back together only to find that the problems were still there. Have had a garage examine the head today and their professional
|
| 406 | 06 Jul 2008 22:31 GMT | 4 |
I am the owner of a 02 406 estate 110 the mileage is 62000. Just by way of a change, I am not looking for any advise, tips or help. I have had numerous cars over the years and without doubt this is the finest car I have owned. I have had it for 4 years, in that time I have ...
|
| searching for a zylinderhead 504 td | 06 Jul 2008 14:29 GMT | 1 |
Searching for a zylinderhead for Peugeot 405/ 93/ td any idea to found?
|