| Thread | Last Post | Replies |
|
| tyres | 31 Aug 2008 20:09 GMT | 5 |
Has anybody used a company called mot 4 u in chertsey?down hanworth lane buy the railway station,they gave me a quote for 4 175x70rx14 tyres all in £115,00. i have tryed other places but can not get the price down.has anybody heard any bad things about this company if so
|
| Squeak!!! | 30 Aug 2008 10:18 GMT | 9 |
My 52 plate 406 has developed a squeak! When I first start the engine it sounds like a bird chirping under the bonnet, this disappears once the engine has warmed up. Closer examination suggests it's coming from the pulley of the unit
|
| The Hydrogen Car Will Arrive Even if it Takes Time | 28 Aug 2008 19:48 GMT | 1 |
Hydrogen fuel cell cars are expensive and impractical. So why would we even consider them? http://carwithwater.googlepages.com/fuel_cell_cars
|
| 306 rear suspension noise | 23 Aug 2008 15:23 GMT | 9 |
I'm struggling with this one. My old 99 306TD has about 150,000 miles on the clock. For about the last year the rear suspension makes a loud clacking/clicking noise on occasion when driving over bumps.
|
| tyres | 21 Aug 2008 22:22 GMT | 4 |
Has anybody on this group had Westlake tyres fitted to there car or van?if so have you had any problems with them.( the reason iam asking is i have just had 4 fitted )so it could be just shut up and get on with it hahahaaha
|
| heating relay circuit problem | 21 Aug 2008 19:28 GMT | 20 |
307sw 1.6Hdi 2004 Hi, Following on from all the other problems that I have had with this car (if you have seen my ealier posts). Today I took my car into the garage to have
|
| 307 1.4L Petrol: Low Oil Pressure warning | 19 Aug 2008 06:32 GMT | 13 |
The "oil pressure low" message appears on the center screen along with the low oil warning light. Occasionally, the stop engine light comes up. This happens at low rpms, when (a) accelerating very gently in 1st or 2nd gear, or, (b) coming to a stop from highway speeds without
|
| Rear Exhaust Mounts | 18 Aug 2008 12:33 GMT | 1 |
Anyone know where i can buy the rubber bits that hold the exhaust to the chassis near the rear exhaust for a 306?
|
| 406 Locking | 16 Aug 2008 19:21 GMT | 4 |
I have an HDI diesel 406 on a 02 plate. My problem is the central locking. When I press the button to lock the car, I can hear the locks activate followed by a bleep but the car is not locked, the bleep is something new. This has happened intermittently over the last couple of ...
|
| 307sw 2004 battery draining? | 15 Aug 2008 09:46 GMT | 48 |
My Car is a 307sw 110HDi 2004 pile of crap peugeot. 6 weeks ago the cooling fan wouldn't stop running until the battery was dead. 5 Weeks ago the boot struts stopped holding the boot up. 4 weeks ago the anti pollution fault error kept coming on. 3 weeks ago the Cam belt
|
| Headlamp indicator flashing | 15 Aug 2008 08:00 GMT | 1 |
On my P406 the indicator light on the dashboard that tells you that the headlamps are on occasionally flashes on and off for no apparent reason (usually, but not always, when the headlamps are on). Is this trying to tell me something or is it a fault. I suspect it's a
|
| silence is boring | 11 Aug 2008 21:46 GMT | 1 |
Clarion cd/radio on my 53 plate 406 - push button on/off/volume has packed up. Anyone out there know what I should do please? Or willing to pay for singing lessons!!! Ta Jan
|
| Buying 206 | 11 Aug 2008 17:44 GMT | 3 |
Thinking of buying a 206 , haven't decided on what type of engine petrol or diesel looking at 02-04 in years Any advice on what to look for and thoughts on the petrol or diesel
|
| cam belt broken to early? | 08 Aug 2008 03:03 GMT | 3 |
My cam belt broke and caused £1500 worth of damage 2 months after I bought the car privately. The car had done 90000 but the recommended change is at 144000. The car has been serviced by a Peugeot dealer since new (Until I purchased it) and it ran out of warranty in November last ...
|
| 406 diesel idle problem | 07 Aug 2008 18:22 GMT | 1 |
I'm having a problem with my 2001 2.0 litre HDi 406 not returning to idle. More often than not it sticks at about 1200 revs as opposed to the 750/800 it used to. Sometimes blipping the accelererater makes it die down to normal,othertimes it just won't budge.
|