| Thread | Last Post | Replies |
|
| 1998 306 coolant | 04 Aug 2008 10:18 GMT | 2 |
Hi, Please can you help someone who obviously needs his eyes tested...Where are the coolant level markings on my R Reg 306. At the moment the coolant looks a long way down a a very deep hole!! Thanks
|
| Windscreen Washer | 03 Aug 2008 15:16 GMT | 4 |
I have a problem with my 51 Plate Pug 307, The windscreen washer spray does not work, I cannot hear the pump whirring like it did when it was working, Has any one else had this problem, and if so is there a simple solution i.e. a blown fuse ect. I cannot afford to send it to a ...
|
| 405 mpg | 03 Aug 2008 13:33 GMT | 11 |
i am recently getting poor mileage from my 405 1.9 td is there a easy way of establishing what is causing it or could there be various factors tia
|
| 1997 2.1td reving problem HELP!!! | 03 Aug 2008 11:44 GMT | 8 |
hi sometimes just after start up the engine revs from 10,000 to20,000 for a short while then settles down and i can drive normaly.another problem is from nowhere the engine goes to top revs this can happen anytime at all,the only thing to do is hang on or switch off,please can ...
|
| parts | 02 Aug 2008 15:10 GMT | 8 |
Some one might be able to tell me,fitted a new wishbone arm on a pug 405 (no not mine done mine ages ago) went to fit a new ball joint and when doing up the nut it went tight and the shaft of the ball joint still moved round a little,(did not notice this on my car when i done
|