Well see that a store near me is saleing bio diesel(b30) anybody know
if i can run this in a pug 405 non turbo 1992.xud9a/l ?? they have not
put a price up yet to say how much it is.

Hi, I have a 05 plate 1.4 206 SW with 16k on it and today decided to
give it an oil and filter change.
All went well until I refilled the oil and was looking at the dashboard
gauge to see if I had put enough in.

I've been thinking about getting a code reader for engine diagnostics for
some time. I've got a 1998 406 2 litre 16V (pre facelift). Does this have a
diagnostic port? If so where is it and does it use OBD2?
Cheers

Caterpillar separate keygens available!(SIS,STW,ET)(for multiple
version)
Caterpillar ET multi-version keygen available!(factory and customer
level)

My 2000 406 2.0 110 HDI has a seized rear brake caliper so I need a
new one.
Can anyone please tell me who the manufacturer of the Pug brake
calipers was/is? or a source for such parts?

Bonjour,
je recherche un attelage pour mon 806 année 1995.
Merci d'avance
0666248666 à Vitry sur Sine dans le Val de Marne

Well not much going on in this forum, everybodys car must be running
100%.?

307SW HDI 90 - 2003:
Had ABS warning fault light come on last week on way visiting Portsmouth and
then went away once stopped there for a couple of hours and came home. Not
come back on since. Took to usual Puegeot dealer today and said fault with

Anyone using this in their HDi Pug?

The reversing sensor on my cc goes into continuous beep as soon as i
engage reverse gear, can anybody help??
Peugeot 307

Hi Chaps.
My Girlfriends 306 is producing a creaking noise from the offside rear
suspension, either when compressed or released.  Inspection showed that
the rear shocks were fairly rusty externally, so I've replaced those,

I seem to remember seeing this problem on here before but cannot now find
anything about it.   The rear N/S door on my 1999 406 remains locked
irrespective of whether the rest of the doors are locked or unlocked.   When
pressing the plip to unlock you can hear the mechanism ...

Well door pins on a pug 405, do they unscrew or just hammer out and
hammer new ones in.cant even look in the haynes book as i have lost it .

Peugeot 206
i dont think the top is all the way down but i am unsure.. is there
any way to put the top up by hand ? and also does anyone know how to
rreset the service indicator ?

Does anyone know where the fuel additive ecu is located on Peugeot 807
(04 reg) 2.0 HDi? I have a "Fuel additive minimum level" warning and
would like to check the fuel cap sensor at the ecu end of cable. I can
hear the sensor clicking at fuel cap end but that might mean nothing.