Very brief, I can unscrew the connector from the door, Yippee.
Do I have to remove the entire facia/dashboard to get at the other
end?
Solder Man (If I Have 2)

Easy to remove if u got arms that go round corners.never had a job like this todo in the haynes it say remove 3 screws thats ok if u can get too then 2 u can and the third one well forget it.now i got it all out have to ring round to see if anybody got one in stock, also does ...

I'm getting a loud rattle when the engine is revved up from the timing belt
end of the engine. The auxiliary automatic belt tensioner seems to 'bounce'
rapidly back and forth when revving the engine to about 2500 revs.
I wondered if anybody has had a problem similar to this and is ...

My girlfriend has a 51 reg diesel 206 which has developed a strange
electrical problem , she mentioned to me last week it has seemed
sluggish to turn over when starting from hot or cold and I'd made a
mental note to check for a lose wire or something . When she got home

Can you true the rear wheels on 406 coupes  inside corners of tyres wearing at a ridiculous rate.

I tried to replace the battery in the key for a 2000 (X Reg) Peugeot
306. The key looks like this:
http://img227.imageshack.us/my.php?image=plipinfrasc5.jpg
It worked before I replace the battery but only when quite close to

Hi experts,
Currently having a bit of a disagreement with a Peugeot dealer and would like your opinion on whether or not I have had over £300 of unnecessary work carried out.
I went in for a simple replacement key fob for my trusty 306.  Mine is pretty much knackered and the infra ...

Can anybody on this group tell me where i might be able to get heater hoses from as Peugeot Garage does not stock them for my car any more its only a pug 405 1992 diesel.

Well never had any problem with the heater untill running down the M1 last night getting a very wet foot due to the heater matrix leaking.is it a easy job to do i have to wait till the summer is here to do it ,so i can give my self time to get up after i have been bending down ...