How many of us here Power Bleed our brakes?
   I only have a few times on some odd-ball systems. Even when working on
newer ABS vehicle I manually bleed the brakes.
Charles

I had no idea where to post this because the are are so many "auto" and
"car" groups on the web, but I will try this one??  My older brother who
is in the army, is giving me his car because he doesn't have time for it
anymore because of his army duties. It is a 1981 Chevy Camaro ...

I am not a mechanic and I don't have much money so I am trying to
diagnose a problem myself  (and perhaps with your help) in hopes of
saving a few dollars before I take it to a mechanic for servicing if
that becomes necessary.  I have a 1992 Camaro with stock V-6 engine.

if you had to choose between these two motors which one would you choose and
why?
eng1  370hp@5900     trq 410@3900
eng2  390hp@5800     trq 377@3900

$$$$$$  MAKE MONEY!!!   $$$$$$
MAKE THOUSANDS!!!
I found this on a bulletin board and decided to try it: I don't care about
the useless pre-fabricated crap this message usually says. All I say is, it

1976 Camaro  - built 350 engine - 350 turbo transmission w/ B&M Shift Kit -
410 rear-end.  White with Black interior.  Asking $2000.00 firm.  Call
(919)967-6756

I live in Boston MA area, and need a good chassis suspension shop, I
could also use shop or mechanic to turn my Camaro into a safe but DEADLY
import killer, so any recommendations would be appreciated. I need roll
cage tranny swap engine swap etc too.

Hey all,
The fine folks at my local CostCo Tire Center seem to have lost a couple of
the black plastic lug-nut covers on one of my wheels (5 spoke 16x8, 2001
Firebird Formula).  I don't know if there's a part number for these, but if

How does one check whether or not the windshield wiper switch is working
properly? My 67 Camaro wiper motor doesn't shut off when the switch is
turned off. I don't know if the motor is bad,  a wiring problem or the
switch is bad. Any ideas?

I have a 94 Z28 with 64K on it. It will only start if I warm the
engine first with a halogen light. Once started, it does not restart
as crisply as it used to.
I replaced the ignition module at 40k. Question: Do I take the beast

I have an 84 firebird, and the headlights aren't working... I replaced the switch and relay, and still nothing. The dome light doesn't work either. I do not see a fuse for it anywhere... I am able to get all the lights to work if I supply 12 volts to the switch or relay, but the ...

I am 99% complete with replacing the head gaskets, but I am STUMPED on the
Power Steering Pump Brackets.
This engine does not have a central serpentine, it has 4 fan belts.  The
Power steering pump has two brackets that I cannot figure out.  They make no

       I'm thinking of putting an LT4 conversion kit in my 96 Z28.  I
normally lurk around the group soaking up the conversations. There's alot of
knowledge here and I thought that I would ask your opinion on this. I have a
pretty much stock car. I will be getting the clutch done ...

i have a 1967 Camaro RS
i am in need of a new rear end. i currently have a 8.2 10 bolt with 2.73's.
i am looking for a new rear end because the motor was just finished being
built. its a 327 bore 40 over 10.5 compression. with a 292 comp xtrem cam.

#1. If your car breaks down on the side of the road. Your 20 miles away from
home, any tools or spare parts, let alone a parts store. Do you:
A. Call a Wrecker to tow it home, so you can fix it.
B. Call to have it towed to a shop so they can fix it.