Looking for a rebuildable or good 327 Chevrolet engine. Prefer in the Kansas
City, KS or Springfield, MO area. It will have a good home in a first gen
Camaro.  Please post here or email me at firebirdracing@yahoospamsuxxors.com
Remove the obvious.

I'm selling my 15th Anniversary Trans Am.  One of 1500 made.  It's an
automatic.  Has 100,000 miles.  Recaro seats.  Starts and runs good.
Was rear-ended, damage is minor.  The passenger side quarter panel has
the most damage and I will throw in another perfect quarter panel

Hi guys.  Check this site out!!  http://www.ricecop.com
Looking at some of these ridiculous vehicles will make you proud to know you
haven't f*d up your own car by attempting to do what these losers do to
their cars.

I'm about to start putting the Olds 350R back together in my daughter's
77 Firebird.  I've got an aftermarket hydraulic cam, .422.444 lift
(int/exh) and .050 duration of 204/214.  Will stock valve springs work
on this cam, or will they bind?  Do I need aftermarket springs?

i want to put in 1.6 roller rockers in my 95 LT1 corvette... how do i go
about doing this? i only know that i need narrow body roller rockers. what
else do i need to buy? should i replace the springs? i am leaning towards
getting the gm 1.6 rollers from gmpartsdirect.com along with ...

Hey all, how goes it?
I've wondered about this for some time now.
So many people get the catback systems and some get
headers too.  But a large majority of them keep stuffing it

Guys,
           are there any other points my oil pressure sender can tap into
rather than the one just above the oil filter? The reason I ask is that I've
just fitted a set of Dynomax headers from Summit and the only problem is the

I have a problem with my girlfriend's '92 Camaro V8. While driving home the
other night the power steering bracket broke into hundreds of pieces, and
the alternator which was attached, came loose and also broke. I managed to
get the car home and now I'm going to attempt to fix it. ...

Hey guys,
 So I bought an aluminum driveshaft of ebay and I unpacked it today.  Well,
one of the U-joint retaining clips wasn't on a cap and the U-joint cap has
worked it's way off and the needle bearings and grease and everything is

Hello guys and gals,
i am new to the life of Chevy II's
I was just given a 1965 Chevy II,
it doesn't have a motor,tranny,or majority of the interior. i just looked at

my smallblock has a serial numbr of  3941174    can anyone id this for me
thankyou

Hi everyone ... need some help with my 1974 firebird. Ok here is the deal.
My car had been parked in my garage for several months without being started
because I was out of the state. I come back and try to start her up and she
does not budge. I figure it's the battery from sitting ...

Anyone interested in machineable 350 heads? I have a set for $250 +
shipping....unless in Northern Ohio, I can probably deliver myself.
J

I need the firing order, dist setting, and carb settings for a 1985 TA 5.0
HO
Rob

Dear Internet User,
Good day, This article I've written is all about the fact where I earned an
ASTOUNDING amount of money in less than a month and I've decided to share or
reveal the secrets behind making big bucks in the Mail Order Business.