I have a 94 z28 which runs fine when it is cold and warming up.  After I
drive it about 1/2 and hour or so it starts to miss at 2000 rpms.  If you
depress the throttle at 2000 rpms 55 mph it jumps and misses.  If you floor
it it seems to run okay and take off.

Well.. Got the 'bird running again.. took it around the block and out on the
hiway for a while to see if it still ran decent... it did.. brought it back
and 15 feet from the garage the pass front wheel locked up... think the
brake.... took off the wheel and sprayed wd-40 on it and ...

Hey Guys,
 Here's my dilemma.  I think I may have gotten too big a cam for my car and
I'm thinking I've screwed up enough that I have a very narrow powerband.
The problem I'm getting is I get gobs of torque in 2nd gear up to red line

I have just replaced my right hand power mirror on my 02 Z after being
sideswiped. The replacement mirror is by a company called Kool-Vue.
My question is: the distance from the inside edge of the mirror housing is
almost right against the part that bolts to the door. On the driver ...

Anyone up for IRC tomorrow night? I was thinking about starting at 9:00pm
eastern time (6:00pm west coast.)
                                       NOI

Anybody have an email for Nate?  You can email me it if you don't want
to post it.

  Tonight I did a dumb thing, I went in to Advance auto parts. This kid
asks if he can help me. I figure sure, what the hell. I ask for header bolts
for a 77 305. He says "I don't think there is such a thing."
   Seeing smoke coming from my ears he asks someone else who tells him

After storing my 1991 Trans Am GTA (350ci) for the winter and then
re-starting it, the lights will no
longer open (pop up).. I can manually open them, and the lights themselves
work just fine, but the motor

If anyone is interested in my 'bird for sale, good starter for those without
the deep pockets
1993 Firebird
3.4l V6 @ 80000 miles (ish)

BlankAny body know if theres an 'off the shelf' replacement RHD headlamp to
fit Bullnose Firebirds (1970 - 1973)? I dont even know if theyre sealed beam
units like in the old minis?
Someone must have had replaced one sometime!

My driveshaft bearing is bad, I cannot find another two piece driveshaft,
can I just buy one from a trans am or something in throw it in? I know I
can fit a single piece driveshaft, if I do, will that f*ck up my car? I
have a gorgeous 94 camaro v6 stick shift.  Any input greatly

   I had an idea for an off the wall powertrain combo for a car. A 3.8V6 5
Speed FWD J-car. I already have a running 1995 W car 3.8 (in the regal
still). Plus my 87 Cavalier Z24 with bad injectors, and a bad 3-4 snycro.
Plus  a new transmission for it.

Heya...I was driving home tonight and noticed that my turn signals come on,
but do not flash. Could any of you tell a non-gearhead such as myself where
to find the solenoid/switch responsible for this? Thanks in advance.

www.4thgenforums.com
Anything goes at this forum. See our nude babe threads that features
member's girls posing with their cars.

would a front (1.25") swaybar from an 80 TA fit a 76 Camaro?
My dirt track Camaro didn't come with a bar so I "borrowed"
one from my project car and had a HELL of a time getting the
subframe bushings on.  (I couldn't find the stock ones so I bought new