| Thread | Last Post | Replies |
|
| Part Decoding | 23 Jul 2004 11:38 GMT | 3 |
Hi can anyone decode a part no fitted to a LT1 camaro please It was invoiced as an Echlin TP12 Module, but we're unsure as to what it was. TIA
|
| HELP!!!! My Trans-Am won't start. | 22 Jul 2004 08:20 GMT | 8 |
I have tested the starter it checks out fine, I have a new and fully charged battery, I have use a test light to check out the battery cable that goes to the starter and it checks out good, I also use a test light on the small ignition wire that goes to the starter and had turned ...
|
| 301 to a 350 ?? | 22 Jul 2004 04:20 GMT | 3 |
I have a 1980 TA with a 301. i want to change it to a 350. will the motor mounts for the 301 work with a 350?If not can i use different mounts to install the 350? thanks for any help. Joe
|
| 1997 Z28 Clutch AND Water Pump problems | 21 Jul 2004 23:59 GMT | 13 |
Hi all!! Haven't posted on here for a while. Glad to see everything's still happening here! Anyways, It seems my clutch on my 1997 Z28 (350 LT1, stock) is starting to go. BUT, the clutch pedal is getting 'sticky', like the spring is not as 'springy' as before. The
|
| timing | 21 Jul 2004 23:57 GMT | 1 |
Does anyone know what the factory timing spec is for my '91 Firebird with 305 TBI? I'm trying to pass emissions and the timing sticker is missing from the car.
|
| Having trouble with brake lights!! | 21 Jul 2004 19:28 GMT | 5 |
well i have replaced the brakelight bulb and it works but only when you brake without having the headlights on. if the head lights are on the brakelights wont turn on. what can be wrong....... all help will be greatly appreciated
|
| OT: Way OT | 21 Jul 2004 08:12 GMT | 17 |
Enh...get a load of this dude. Dunno WHAT the hell he's thinking. http://adcache.cycletrader.com/5/7/6/73721376.htm Martin '01 Formula - MTI Air Box Lid, K&N Filter, Hurst-6,
|
| DIY alernator repairs | 21 Jul 2004 05:06 GMT | 4 |
My 79 TA has a Delco alternator that charges OK but the front bearing is very rumbley - also the bushes are very short so I wondered if I could get a recon kit with bushes and bearings - or even just the bushes. Is there such a thing and is there anywhere I can order one on the web? ...
|
| breakers yards | 21 Jul 2004 00:30 GMT | 21 |
Anyone know of any online breakers yards with firebird parts ???? thanks!
|
| Another Retro Camaro | 20 Jul 2004 13:59 GMT | 13 |
Any of you suckas seen this page? http://hp-car.com/2005.html -- lab~rat >:-)
|
| Wonder Bar | 20 Jul 2004 10:22 GMT | 55 |
I bet you thought I meant an alter-culture pub where Bigjfig and Bendig dip their hands into each other's pant pockets. No, this is an interesting piece of extra-stiffening (B and B are really starting to get !excited! now) equipment "GM engineers
|
| IROC Camaros.... | 20 Jul 2004 04:56 GMT | 4 |
Did they make/produce any prototype IROCs in 1984?
|
| Shaker scoop question | 20 Jul 2004 04:40 GMT | 4 |
It's alive!!! I let my daughter drive the '77 Firebird today for the first time (I drove it first...) and it sounds GREAT. I haven't put the hood on yet but I did put the air cleaner and scoop on. My question is this - is there a good way (right way?) to put that
|
| Valve adjustment question | 20 Jul 2004 02:44 GMT | 13 |
I'm finally finishing up the overhaul on the 77 Firebird with the oddball (at least to me) Olds 350 engine. My Chiltons manual only shows how to set the valves like a Chevy 350 where you tighten down the nuts until it stopps clattering then go down a little more. The Olds 350 ...
|
| Just found this great oil! | 18 Jul 2004 13:13 GMT | 5 |
I heard about this stuff for a little while but had that mental block about changing oil every 3,000 miles.Heres the link to the website http://64.17.132.131/ or go to synfullube.com The site was was ok but the product is incredible. I saw results right off the bat so I'm going ...
|