Happy 4th everyone! Here's a little something to think about today.
(I suggest reading the last part, if nothing else - NOI)
IN CONGRESS, JULY 4, 1776
The unanimous Declaration of the thirteen united States of America

Have a small block chevy with an Hei unit. All stock. Do not have
spark. If I remove the distibutor, connect a jumper from the battery,
and spin it by hand, it fires. If I reach over and set the distibutor
in the block, with the jumper, it will not fire.  The rotor is

Hey Joe,
Do you know if GM made a proportioning valve rebuild kit for the 73-81
Camaro?  If so, do you know if it is still available?  I am also looking for
a set of 45? flare brass line seats to replace all of the brass seats (I

I am planing on modifying my 97 Z28. Any helpp on sourcing the
following, make, model numbers and source to buy, would be
appreciated..
Powerdyne

I am having trouble getting the brake fitting off the rear wheel cylinder.
I have tried vice grips, brake clean, and alot of harsh language... it is
pretty much rounded off now, any ideas? do I have to replace the whole
brake line if the fitting will not come off?

EDIT Please Read First EDIT
I want to make the purposes of this post clear. It?s partly for fun,
that?s the part where I tell you about how stupid I was by setting
myself/car on fire with poor judgement when using my torch. It?s