I just bought a 1992 Pontiac Firebird. This isn't my first F-body, but
it is the first one that I've owned that used pictures instead of
words on the instruments. There are several switches that I have no
idea what they do, so I don't know if they are working or not! They

I'm searching for a way to use my 1988 Firebird TPI without having to
install an Anti-theft module.  I had to buy a new factory chip and the
only one available was with antitheft.  Unknown to me, I didn't realize
you had to have this module to even start the car....duh.

   Long Story short: After getting  my   1998 Century back from the body
shop today, and finding out what I had begun to suspect,  I want to get rid
of  it.
   When I purchased it used roughly 2 years ago(before I started  do some

President Bush and Colin Powell are sitting in a bar.
A guy walks in and asks the barman, "Isn't that Bush and Powell sitting
over there?"
The barman says, "Yep, that's them."

how hard is it to replace a tilt bowl on a 3rd gen T/A?  I was told by a
friend its not hard to install, but you have to be careful. Or, is it better
to replace the whole steering column?
I called a junkyard, and they said I had to take the whole column.

If I was to plan to run 500rwhp, would I be doing too much work on the
tranny of a 96 Trans Am? How about the engine? Would 500rwhp be too much
for it? Anyone the the highest that the tranny and engine can take?

I know it's nbot an Fbody....but...
I have a '90 S10, 5 speed/4cyl. Today when I got on it a little, it acted
like it was spinning the rear wheels...without spinning the rear.
I am sure it was the clutch. Does this mean it's at the end of it's life?

I'm looking for some advice on replacing the intake manifold gasket for the
LT1. I have a Chilton and Hayne's repair book but still want someone with
experience to tell the hands on story.
Is this something an amateur with mediocre mechanical abilities can tackle

Short version:
If I'm getting one from a partstore, are there any years that are "heavy
duty"?  That's twice now I've been sidelined at the track with a starter
that won't turn over very fast (same starter, different engine) and a

Please can some tell me the inside and outside diameters of the power
steering pump shaft oil seal that is fitted on my 2nd gen. 400 ci
Transam

Could anybody help me? Shortly after starting the following happens when I
brake moderately: The engine gives gas while the car decellerates. The tach
falls to 500/min and then it jumps to more than 1000, then it falls to 500
and so on. While standing idle is constant at 700/ at ...

I am looking for an LS1 car in the New Orleans area, must be a 6 speed
also.  If you have anything you are interested in selling, let me know
please.  Thanks,
Erik D.

Hey, can some of you kind folks give me the URLs to some online GM
parts retailers for my 2000 Trans Am Firehawk?
I am needing a passenger-side visor, and don't want to pay the $100
price the dealership wants (wish I new of a junk yard in my area...).

I have just boughten a 1995 v6 firebird and ran into some trouble.  The
exhaust system has somehow already found a way to rust out, and I am
searching for a stock replacement.  I was just wondering if someone could
tell me what company manufactured the mufflers and exhaust.  Also, I ...

Hi folks, Does anyone know where to get a set of Firestone Wide Oval 60's?
New preferably. I need 4 to bring the car completely back to factory spec.
Like this one, this is my original spare. BTW, it's a '73 RS/Z-28.
pic