My '84 Camaro Z28 with 305 H.O. engine has taken up smoking in the engine
compartment.  The oil trail leads up to the rocker arm covers.  So I
tightened all cover bolts and it still smokes (a new gasket had been put in
about 3 years ago, with very little mileage since).  Now I'm ...

How goes it?
Well, it's busted.  I've been wandering thru a pdf file of part numbers
looking for it.  Think I've found it as a "boot retainer" as opposed to a
bracket but not sure if that's exactly what it is.

I'm thinking of getting a 2002 z28 (or ss) convertible.  There are
several low mileage cars on autotrader at a decent price.  I can
really only afford one vehicle, so if I get a convertible it would be
my winter car also.  Does anyone here drive one in the winter?  I live

Anybody ever try and install T Tops into a 2nd Gen?  I'm thinking about
putting them into my 79 and want to know what the issues are.  Thanks, David

I have an 1987 Formula Firebird, and recently the right headlight
motor keeps running for a short time after the light is fully up or
down.  Is there a limit or overcurrent switch that is in line?  This
only occurs on the right headlight.   The motor on the left stops as

Could someone please tell if it is possible for a regular Camaro to be a
"real" split bumper car?? There was a 1972 Camaro in my local car
magazine for sale at a very reasonable price, so reasonable that it was
sold within 2 days after the book came out.

I need to lift my '84 Camaro nose up on jack stands to work on oil pan and
transmission areas.  But I'm not sure where the jack stands go.  Can anyone
describe the spots, or point me to a web picture with these areas
highlighted ?

I need to remove the drivers door panel on my 2001 camaro convertible to
replace a speaker and service or replace the power window motor, but I want
to do it right without breaking any of the clips. I read somewheres that the
panel is shot if you do that. Any tips?

I was told to ask you two for help. I posted a question here about
doing a disc brake swap on my 67' Malibu. Several years ago I was lead
to believe the 70' Camaro steering knuckles were a potential swap for
the 67 Chevelle's. Both are forward positioned tierods whereas the

Does anyone know if there was a metallic gray for 86 Iroc's?