Hey everyone.. would like to schedule another IRC session.... Same
channel..I'm thinking Saturday Night... say 7pm central time.  If anyone
would like to join the discussion and don't have the info.. shoot me an
e-mail (Nemetze@uwplatt.REMOVE.edu) And I'll fill ya in.  Anyone ...

I have a 2001 Camaro convert. Today while putting down the drivers window,
it stopped about 3" from the top.I can not put it up or down. How can I TS
to see if it is the switch, wiring issues or the motor?
I did find a site that showed me how to swap it out.

You guys might remember a few months back that I was looking for a
spring for the upper butterflies on my daughter's Firebird.  I've got
the carb off and am overhauling it now and have the spring on properly
so she'll have the secondaries operational.

Any rumores of a new Firebird in the works.  keep hearing about a new Camero
for about the time the GTO goes to the new platform.
Heave no news, just that the 05 Mustang is making a big hit in Central PA.
Dealers have none to test drive and few to select from.

I posted an Announce thread a few thread back.  Seems I got sarcastic
response.   I deserve them considering I didn't follow Usenet protocal.  But
I'm new to it, so everybody get's one.
Anyways, please give me your feedback on my site blujay.com.  It's a 100%

I have a '78 T/A with a 400 Pontiac engine. There are 2 shims between
the starter motor and the block where it is bolted on. This engine has
been put together by someone who doesn't know what they are doing.
Please can anybody tell me how to work out how many there should be.

To all:
   I keep   seeing people  ask  for Third Gen  parts.  While I personally
horde these  parts, I  have been thinking  about ridding my   self  of 4
S-10's. To make room for 4 Third Gen parts  cars. If I were  to do so,  I

use this link
www.matildasplace.com/boobs.jpg
not this one that she posted earlier
www.matildasplace.com/boobs.html

Ya'll know me. Just your average drunk, faul tempered, redneck
Mechanic who came up the old ways.
Well I thought I would give a supposed A.S.E. cirtified Mechanic
from here a break. Jason Sobol. The kid that claims to be a wrench

Look folks, this silly w.nker couldn't pour piss out of a a boot if the
instructions were written in French on the heel and someone turned it
upside-down for him as he was sniffing and savoring the smell of the
contents.  He'd probably drink it and call it a fine vintage.  As long ...

Beautiful day here near Toronto ,,,brand new plug wires... new plugs... and
a brand newly rebuilt fresh carburetor done by myself over the last few
days... can it possibly get any better than this. The sweet smell of doing
something yourself and it working perfectly.

SHOULD I BUY THE NEW MUSTANG OR NOT.  THAT IS THE QUESTION.  TO BUY OR
NOT TO BUY.  BUY OR NOT

I own a '93 transam. There is a noise coming from the rear-end. You
can hear it at slow speeds usually after you have been driving for
sometime. At cursing speed you do not hear it. It is a 'clunk......
clunk...' kind of noise. Any ideas what this could be?

Anyone having problems with their door planels cracking ? I noticed a
2" crack on my driver side door panel and 0.5" crack on the passenger
side door panel. Tried to get a set of new panels on e-bay - got a pair
in excellent shape, but they also have cracks starting (in the same

Over the past few months I have been peppered with the dumbest of questions
and trivia.
   Like just the other night. I was half out of it, and in a chat. Some pud
wacker come in, see's I have a car title, and askes this: Can you get me a