I will be pulling the engine out of my '88 T/A with TPI 350. The trans was
pulled out of it in the past for repair before I bought it  and the metal
cooling lines were bent all to hell. The engine I'm going to put in it will
have headers (clearance issue) and without the engine ...

Well it figures ... my extended warranty on my 2000 Camaro SS ran out in
March, here is the end of May and the Service Engine Soon light is on and
will not turn off.
The only thing I had done was turn off the shock sensor, because it was

This is the code I am getting on a 2000 Camaro SS with only 15,000 miles.
Seems to drive fine, I have only use premium fuel in it.
Should I just reset it or take it to the shop?  Is this harmful to my car?
If I take it in ... what should I tell them so they don't soak me ?

Recently picked up my 5th F-body (1st 4th gen), a 1996 Trans Am
Convertible. Automatic and loaded with every option except Ram Air. It
is purple with white top and white leather interior. Yeah, I know it's
not everone's cup of tea but it was a good deal on a 1 owner(female

oh and I forgot to thank all of you for the help on my last question..
 ok how are the 350 and 305 different besides the power of course like  
will the intake manifold off of a 305 fit on a 350 for example cause it  
sure looks like it will.....

Howdy group...
I have a '95 Z28/SS clone with almost 150,000 miles on it.  I've always
taken care of it and changed all fluids routinely with synthetic, and even
flush out the crank-case every-other oil change.  There's no leaks, and I

Hi Friends,
Justia.com has set up a new Web site listing Auto Recalls by Car Make,
Model and Year.
The URL is:

I've had the opportunity to finally start to look at the 'Bird and am
curious as to what the engine really came out of.  Its an orange block
(assuming that means chevy) but there is no ID tag in the front behind the
alt that I can see.  The only numbers I can find are from the rear ...

I was wondering if anyone is interested in possibly buying it. It is a 1967
with matching #'s.  A 326 ci and a 2 spd powerglide. I am asking $10,000.00
for it.  Am I out of my mind asking that much?
I have pictures if that will help.

I am in search of a......
1968 Pontiac Firebird 350 / Convertible Repair Manual
Any Ideas where I can find one,,,NO EBAY
zeeduxxy@hotmail.com

I am going to have my brake booster re-cadmium plated, what other parts
are cadmium plated?  My car is a convertible that had been sitting for
15 years and everything has surface rust.
Thanks,

I was going to wax ole' Betsy again ... and I saw this Lustrelab LXR on
QVC. http://www.lustrelab.com/
It is supposed to put acrylic coating on the entire car that sheets
water.   Looks great on the commercial.  I tried to google on it, and

Does anyone have a hood for sale? Or where can I get one thats not too
expensive? Any help will be greatly appreciated.

I've got an 86 Camaro with the 2.8L V6 and a T5 manual transmission.
I'm pulling the engine out today, and have removed all six of the bell
housing bolts.  The PowerPro Series book I'm using as a guide says
however that there is another nutted bolt that goes through the block

Rare ! Brand new !
For sale on eBay, starts @0.01$, no reserve !
http://cgi.ebay.ca/ws/eBayISAPI.dll?ViewItem&item=7973128338