| Thread | Last Post | Replies |
|
| 1997 Trans Am fuel problem | 28 Jun 2005 06:37 GMT | 6 |
I have a 97 Trans am that ran completely dry of fuel,I have filled it with fuel,tried to start it but it will not start,always started great till it ran dry,someonr has told me that there is a reset button,looked all over but cannot locate,please can someone help,need my car for ...
|
| Overheating problem | 25 Jun 2005 16:57 GMT | 3 |
So I have replaced my thermostat and my electric fan motor on my car, and the radiator is less than a year old. I have the proper coolant level and no leaks. When I drive, it starts out at a low temp, and climbs to 195 F when the thermostat kicks in. Then about 5 - 10 minutes ...
|
| Problem | 24 Jun 2005 05:37 GMT | 4 |
I changed my fuel filter and my spark plugs and wires, and checked my distributor cap and rotor during a tune-up. When I went to take the rotor off, I took off two screws that held the metal part in place (the metal circle around a metal star that rotates inside the distributor, ...
|
| Question about wheels and lowering 1995 Z28 | 23 Jun 2005 23:16 GMT | 4 |
I have a '95 Z28 which I have recently done some suspension mods. I used an Eibach lowering kit to lower it 1.3 inches along with some KYB shocks and new swaybar, etc. I did not include an extra set of bump stop springs. I also have a set of Enkei "Win" wheels with some BF
|
| Power window relays | 22 Jun 2005 11:05 GMT | 31 |
Does anyone know where the power window relay is for a 1980 Trans Am, and what it looks like, I have pulled and tugged everything I can find and still cannot locate.
|
| Exhaust header problem 67' Chevelle | 22 Jun 2005 03:20 GMT | 2 |
Hopefully there are some readers over here that can help me. I've posted this several times in the Chevelle group and got no response at all. I have right now FlowTech 11100FLTs, the right side is a perfect fit. The right side is a no/go.
|
| '68 front spindles - same for disc and drum? | 21 Jun 2005 06:14 GMT | 3 |
Are the front spindles on a drum brake car the same as a disc brake car just with different mounting for the disc brake calipers? (1968 Firebird) TIA
|
| A few questions | 20 Jun 2005 10:24 GMT | 1 |
I've got a 2001 Firebird with a fairly modded v6 in it. It also has a 3.73 rear end so it doesn't have a very large top speed with the 5 speed transmission, and mainly it doesn't get as good a gas mileage as i would like when i cruise around 75-80 mph for a long time. Would a 6 ...
|
| what kind of oil additive can avoid the engine oil leak? | 17 Jun 2005 22:50 GMT | 14 |
sb tell me my used car have some of the engine oil leak, the simple way is to add some additive. who know what kind of oil additive is availabel? where ? Andy
|
| Change Oil Light Question | 17 Jun 2005 18:08 GMT | 2 |
I have a 2000 Camaro SS with 15,000 miles on it. I store it winter/sprint and mostly drive it during summer and fall - less than half the year, rarely putting more than 2000 miles on it a year. Last October I used Mobile One synthetic for the first time, it is now June
|
| Pontiac 400 engine | 14 Jun 2005 07:46 GMT | 13 |
Can anyone tell me what torque is necessary to turn the engine over with the spark plugs out, please.
 Signature David Toft
|
| FOR SALE: 15th anniversary TA | 10 Jun 2005 02:08 GMT | 4 |
I have a 1984 15th anniversary Trans Am for sale. It was rear-ended but is a pretty easy fix. Runs and drives as is. The main damage is in the passenger side quarter panel which is pushed down/forward a little. I've had a body shop look at it and they said quarter panel
|
| Is there any way to identify a hurst shifter out of a 4th gen? | 09 Jun 2005 03:42 GMT | 16 |
I think that I bought a Hurst shifter off of ebay, the seller said it was a hurst but it has no markings on it, is there any way to measure or find casting marks to identify whether this is actually a Hurst shifter and not just a standard shifter? Any help would be appreciated...
|
| OT Question | 06 Jun 2005 02:37 GMT | 5 |
Working on an 85 4WD 2 door S-10 Blazer with the 2.8 V6. Does anyone know if these originally had catalytic converters? It doesn't have a cat now and looks like it never did. Found some headers for it and would like to just put on mufflers and pipes coming out in front of the ...
|
| Gated | 05 Jun 2005 21:30 GMT | 2 |
Anyone receiving this? Kevin klement@shaw.ca ... No sense being pessimistic. It wouldn't work anyway.
|