Home | Contact Us | FAQ | Search & Site Map | Link to Us
Sign In | Join | Other 45 Sites in Network
HomeAnnouncements
Discussion Groups
By Brand
BMWChevroletDodgeFordGMHondaLexusMercedes-BenzNissanPeugeotToyotaVolkswagenOther Brands
By Topic
4x4 CarsRVsDrivingMaintenance & RepairCar AudioCollectible Cars
Country Specific
Australian ForumsUK Forums
ArticlesAuto InsuranceBuyingCars & TechnologyMaintenanceMiscellaneousSafety
DMV Resources
Related Topics
MotorcyclesBoatsMore Topics ...

Car Forum / Pontiac / Pontiac Firebird / June 2006

Tip: Looking for answers? Try searching our database.

ThreadLast Post  Replies
1970's firebird  motor info needed30 Jun 2006 16:10 GMT6
  I tried searching but couldn't find anything really helpfull.  I have a
1970's firebird t-top sitting in a field in Ottawa..It was givin to me as
the owner no longer cares for it, and hasn't been running in 2 years. His
son says it has a 6.2 in it.. I think it is a 6.6  I am ...
o2 sensor?29 Jun 2006 14:45 GMT3
service engine light is on and code for o2 sensor appeared......is it hard to change the o2 sensor yourself........how long would it take
--
danny
-----------------------------------------------------------------------
OEM Chevy Camaro and Firebird Parts Catalogs26 Jun 2006 23:05 GMT2
I have the following OEM Chevy Camaro and Pontiac Firebird parts
catalogs for sale on microfiche. Drop me a line with any interest.
Thanks, Joe.
CHEVROLET    93-94    CAMARO    Jun-94
87 door latchs26 Jun 2006 23:03 GMT1
anyone know where i can order new door latchs for a 87 firebird. i have
been looking on line like crazy, i have checked top down solutions and
Fbody motor sports and no luck
Best way to restore TA APrts26 Jun 2006 22:59 GMT1
My '79 TA is all apart now and I have a thousand parts to clean up.  Sand
Blasting takes forever and I keep popping a circuit anyway so what is the
best way to restore these parts?  Has anyone used an acid dip to restore
many parts (sounds expensive)?  All the parts are crud and ...
what TH350 do I use in my 87 firebird ?26 Jun 2006 21:55 GMT4
 I am taking the crap 70R4 out and was going to use a TH350 6" with shift
kit and use the tailstock from the 700R4 and put it on the TH350 to hok up
that dumb torque arm. Is this the right one I have to use (6") ? Anyone who
has done this and could pass on the info.. would be ...
just rebuilt my headlight motors22 Jun 2006 21:37 GMT1
hi, i just rebuilt my headlight motors the bushing where dust so used
the kit to replace the bushings. now my headlights will go up but will
not go down, but if i try and to manually brign the lights down they
come down. anyone have any ideas
Advice Sought21 Jun 2006 16:27 GMT2
Hi, I think my transmission is going out of my camaro. There other day I
gave it alot of gas and suddenly smelled something burning. I saw smoke
in my rear view mirror. It appeared to be coming from around my rear end
or tires.  I put super torque fluid in it so perhaps it was too ...
1973 Camaro won't start and no spark from coil20 Jun 2006 17:16 GMT9
Thanks to everyone reading this post. With 95 combined years of
experience gathered around the hood, neither my father, my uncle or I
could figure out this issue.
We pulled the 350 tranny to replace it with a TCI Streetfighter tranny
How to receive 50,000+ dollars honestly legally and quickly with paypal!19 Jun 2006 16:50 GMT4
How to receive 50,000+ dollars honestly legally and quickly with
paypal!
Do You Need Extra Income? Quickly and legally?
Do you have a PayPal Account? (If Not the set up takes 10-15 minutes.)
A/C HELP! Am I missing something?18 Jun 2006 17:14 GMT4
This year my 93's formulas AC didnt kick on.. I figured OK, ill just
recharge it. Got the kit from walmart, went to recharge it, and the
compressor wount kick on.. So I bypassed the sensor on the low side if
the AC to start the compressor. NO GO. Figured what the hey, checked
Ford's "Way Forward Plan"14 Jun 2006 18:54 GMT3
A couple articles about Ford's future products.
---
Mark Fields isn't ignoring trucks.
One of the most important product changes in the Way Forward plan is
HELP!! Problem with Ignition Cylinder on my 94Z2813 Jun 2006 15:23 GMT1
hey guys i need to pull my ignition cylinder for i can take it to the
lock smith for i can get the tumblers re adjusted for a new key since
my keys got stollen from me. I already have the air bag and steering
wheel off but im having a hard time getting the airbag coil out. there
Trim around Monsoon Cd Player10 Jun 2006 00:01 GMT1
How does one go about removing the trim around the CD player in a 99
Firebird in order to remove the unit? Do you need the hands of a surgeon?
Strut Tower Brace09 Jun 2006 12:30 GMT18
Does anybody know if the Edelbrock (part# 5227) strut tower brace will fit
on a 1985 Z-28 4bbl 305 H model? Or do you know where to buy a STB that will
fit a carbureted 305 Camaro? I hope I don't have to fabricate my own -- that
could be trouble!
Pages: 1 2 May, 2006
 
Sign In
Join
My Latest Posts
My Monitored Threads
My Blog
My Photo Gallery
My Profile
My Homepage

Start New Thread



©2008 Advenet LLC   Privacy Policy - Terms of Use
This website includes both content owned or controlled by Advenet as well as content owned or controlled by third parties.