Does anyone know if the Oldsmobile 330 V-8 ('64 - '67)crankshaft will
fit a 403 Olds block?
   It appears as though it would seeing as they both have small ( 2.498")
main bearing journals and the same stroke (3.385"). Only noticeable

Please help!  I bought my car with 3,000 miles and it has always had
some kind of electrical problem. First, the center consol lights
wouldn't work (Where the automatic gear lights are supposed to be
displayed) Now, my fog lights wont work--even though every bulb on the

since it's been 30+ years since I've messed with cars, I need a little
assistance (or more).
I have a '68 YS motor. With original heads (74cc) it had a 10.2:1
compression.

Looking for a set of '68 or '69 number 16 heads for '68 400 motor -
REASONALBE!.
OR
1970 #12's.

i have 89 firebird and it has 155,000 miles on it. it is 305 5.0 L V8
with automatic transmission(everything is stock). lately i am having
this problem. this started when i went up a ramp at an airport terminal
(it was pretty steep) as soon as i came to a stop the engine started to

OK, I have had a problem now for many years and am very frustrated about it.
I have a 94 Z28 6-speed with a relatively stock LT1 (including good ol'
Opti-Spark).  Here's the problem: at light throttle (between 1500 and
2000rpm, all gears), the engine runs rough and almost seems ...

My 91 Firebird 5.0 TBI was running great, then died suddenly. SES light
on occasionally - code 22 (Throttle Position Sensor low voltage) for a
few weeks with occasional erratic idling. Now, will crank, but
injectors don't fire, and engine won't fire at all with gasoline poured

I just bought a 89 turbo ta with 17000 miles. It has been sitting for 4
years. When I floor it, the car misses and backfires from under the
hood. I have changed plugs, wires but that didnt help. I took it to the
shop, they replaced the computer and said it was fixed. It is just as

Please help me fix this car for the kid:
Code 12 - no signal to ECM System PASS
Code 32 - BarametricBARO sensor circuit failure
           EGR valve diagnostic switch closed during engine startup or

I have a 76 T/A and the power windows just stopped working.  They
worked fine yesterday when I rolled them up but today nothing.  I have
console mounted switches and I checked their continuity and they are
good.  I've metered the wiring harness coming to the switches and I'm

Hi Group,
For a while now I've been contemplating buying an adju' regulator. But I'm
kind of unsure really. Not to sound like a dumb a.s but it well known that
as pressure goes up volume goes down. so How exactly does the regulator help

hey everyone,
i need some help on this camaro. its a 1983 Z28. 305 that was fuel injection
but was converted to carb.  it has a holly high rise intake (thats all i
know of). mileage is under 100k.  its an at(like most all of them) but it

i ave replaced the speed gear in the tranny of my 83 carmaro 2 times the
cable seems to turn real easy but yet the gear inside the tranny snaps in
half , in less than 2 miles driving. what else could it be that's spapping
my gears?

I have a 1985 Z-28 5.0L TPI.  I was wondering if the catalytic
converter contributes any significant exhaust noise reduction.  I
recently replaced both the original catalytic converter and the
muffler on my car.  I noticed that the exhaust noise is noticeably

Trying to get my Firebird down here to NC at some point.. and have been
thinking about what to do with it.  Its got that beautiful rebuilt 350
(360) engine and 5 speed combo in it.. but no removable top to it.  Have
been giving the Corvette look some thought and wanting to do a full ...