Yes I'm gonna put a Chevy 350 into an "81" Pontiac
Firebird/esprit with a 350 turbo tranny. I need all the
info I can get on electrical wiring, a computer to fire
this, motor and transmission mounts/ cross bar or

I'm new to this group, and have a couple of questions.
I just picked up an 86 Camaro project car with a 305 in it.  The
engine has about 150K miles, and the poor car has been neglected and
runs poorly.  It has poor acceleration and the transmission doesn't

Sorry to interrupt here, but a friend is checking out an original
'72 454 SS Chevelle he just bought that is supposed to be numbers
matching. However, he has 781 heads with 75 date codes on them. Anyone
know the correct casting number for an LS5 365-horse cylinder head, or

Hi, I went by a used car dealer this morning, and i saw a red 3rd gen
camaro with colour matched rims. Coudl anyone tell me what option
package/ year this could be?

I just purchased a 1995 Z-28 Cpe V-8 Automatic for my grandson. I'm
having problems with the key working in the doors. The key does work in
the trunk though. He can open the doors with the remote as well, but
not locking the doors. Also the electric window switch doesn't work all

Hey my name is brian and this is my first post, hopefully someone can
give me a hand. My '80 Z-28 had a ton of engine upgrades on it, and as
a result the previous owner blew the 4 speed T21 right through the bell
housing. I bought the car in this state and had it towed to a shop and

I just got a speeding ticket today around rt 123 and 66 in fairfax
county.  The cop was using a radar to track my speed a head and as soon
as i saw him i slow down (before I pass him) but he still pull me over
and told me i was driving 59 on 35.  Honestly, I didnt even look at my

I have a 1985 Z-28 305 4-bbl. H model Camaro. I am getting a engine code 23
from the ECU. My question is, I read that the code 23 is for a 'Manifold Air
Temperature Sensor. As far as I can find is that my carbureted engine
doesn't have that sensor -- or does it? Does anybody know ...

i got my timing right i have a 650 cfm edelbrock carb and i am getting
smoke shooting up when cranking , no firing.  its turing but wont
fire..
Need help please.

My friend's 92 Camaro has a problem with rough idle only when warm.
His mechanic disconnected the wire going to the charcoal canister and
now it runs OK. Any idea what the CORRECT FIX is, rather then
disconnecting that wire?

When I shut off my 90 TA, I'll get a somewhat violent bubbling into the
overflow tank, usually when the temp is above 190* (I can not think of
it ever happening at lower temps). I've gone through various checks for
common causes (compression, no oil in water, no water in oil, ...

Has anyone done a Pontiac 301 to a Chevy 350 engine swap? I have the
350 SBC mounted in, but the engine seems to be sitting too high in the
compartment. I can shut my hood as long as I take the air cleaner off.
Is there a special mount or adapter that I am suppose to be using to

My heater is messed up. When I turn it on it only gets cool and not
even warm. I freeze my butt off in the mornings and would love some
input on what I might need to change or how i could check anything.
thanks guys

Does anyone have a LS1 tuning program with a crack?  I would like to
check a couple of them out before spending a lot of money on one.

I'm building an LT1 for my 86 ta and just want some opinions. I've got a
roller cam for it. I'm torn on rockers though. I'm debating on using crane
rollers (this would match the brand of cam I'm using. But the Harland Sharp
roller rockers look like really nice rockers too. Any ...