I've been having a problem for a couple of years with my '85 F-bird
engine code "s", i.e. 2.8l, where it will stall within 10 seconds of
starting,transmission not engaged yet, for the 1st time in the morning.
Seems to only happen if the car has been sitting for a while, i.e.

I am the original owner of a 1978 Trans-Am, W72 option, auto, garage
kept and it has 23,000 original miles on it.  I have been so busy this
year that I have only taken it out 3 times for a spin.  This last
time, I had a lifter pump out and tick like crazy.  No damage but the

Hey its me again with the '80 Z. I got it to pass inspection without
the reverse lights working, so I've got some time to figure that one
out. However...
The car has a 4 speed Borg Warner T10, that was just rebuilt a few

Help!  I'm puttng my wife's '68 Firebird back together, working on the
under-hood wiring.  I have a couple of wires that I don't know what to
do with.  Coincidentally, both are dark green and heavy - probably 14
gauge.  One runs along with the dark blue wire that attaches to the

Can anyone tell me if there are different size brake drums for the
second gen T/A. I bought a set of rear brake shoes for my 79 Firebird
T/A only to find that the parts sent were smaller than the old shoes.
The drums on my car are about 11.5 inches in dia.

 My daughters 91 firebird quits and will not restart for a while. It will
turn over but not start? I l went to pick up her car because she said it quit
on her again. We just had the ECM unit replaced, the mechanic thought that
was the problem. I went to the car and tried to start ...

My reverse lights won't light up when the car is in reverse.
I'm not sure where the backdrive is, I am told it is located on the
steering column somewhere.There are 3 switches that I can see from
under the steering column under the drivers side of the dash: one near

i just installed a new motor and my car makes a loud noise and when i stop
at a light it will cut off. what could this be?

I found camero and firebird auto parts on this website i stumbled
upon. New, vintage, custom, ANY part for ANY vehicle!.!! I was very
surprised. Go to www.freeadsonlyne.com I had to go through their
sitemap to find it though but it was well worth.

Hi.  I saw a few nice Firehawks for sale not too long ago.  And, I saw
some T/A's and WS-6 RamAir T/A/s for sale,  all from year 2002.  I'm
very curious as to what the exact differences are (besides the hood),
and what the power ratings are for each?  And, what kind of suspension

I have a 1995 V6, its got ODB I but the ODB II connector.
No (ODB II) scan tool so far has been able to read the codes.
I've tried shorting out one or two combinations of pins but cant get
my SES light to flash.

will be since there aren't a lot of choices for 400 heads. <<
Dude, you do know that on all big-block pontaics the heads, intakes,
exhausts, blocks, are all interchangable right?  block size didn't

I recently bought a turbo and intake assembly for a 301 pontiac
engine, but I need the exhaust manifold and whatever tubing connects
the exhaust to the turbo ( I have the downpipe)  Does anyone know a
company that makes the parts aftermarket?  Or maybe a good site that

Hey bud, I've got a 455 cub in my 73/80 hybrid, and my dad had exactly
your situation, he bought a numbers matching 68 but it had a sickly
striaght 6 in it.  We ripped the 6 out and put an old pontiac 400 from
god-gnows-where in, and with no sort of high-priced equipment we toast

Does anyone know how I can fix the following problem; my gas guage (on
instrument panel) is always on empty regardless on amount of gasoline
in the tank. It wont move or register the change in gallons the tank
has. How do I fix this problem. This is for a 1969 Camaro SS. Thanks