| Thread | Last Post | Replies |
|
| 95 Grand Am wiring diagram | 06 Nov 2005 03:37 GMT | 1 |
Im looking for a wiring diagram. My back up lights dont work period. There is no power going to them.
|
| GM 4T60-E transmission diagram | 05 Nov 2005 22:02 GMT | 4 |
Does anyone know where in the web I can find complete diagram of GM transmission 4T60-E. Maybe some one could send me clear photo copy. Thanks
|
| Scanned code said "Crank shaft sensor and knock sensor" | 05 Nov 2005 18:45 GMT | 1 |
I have a 2001 Grand AM GT V6(3.4). When I accelerate the car jerks a few times, then the Service Engine Light comes triggers. It evenually goes off after a few days. I took it to all of the mechanics. One said I have 5 bad fuel injectors, I thought that was outrages but not ...
|
| FYI INFO ON 97 DUNFIRE KEY | 05 Nov 2005 18:24 GMT | 1 |
been fixing up a 97 sunfire with 2.2 engine. put in new pistons,rings,and did the head. next,,, the ignition key switch wasnt working right ,you had to line up the key just right to get it to turn.. i thought,well ill get tumbler and lock off a junk but the ones i ...
|
| cooling fan | 05 Nov 2005 16:44 GMT | 1 |
I have a 96 pon sunfire 2.2 and when the check engin light comes on my fan also comes on. when the light is out the fan will not come on at all even when the tempure is hot.
|
| 1986 Grand Prix heater core? | 04 Nov 2005 05:52 GMT | 3 |
I have an '86 Grand Prix and I've recently had to start using the heater again. When I turn on the heater, steam comes out of all vents and it smells badly like anti-freeze. Is my heater core gone? How hard/long of a job is it to change out? Should it only be done with new ...
|
| bonny sse 3.8 problem | 04 Nov 2005 04:01 GMT | 5 |
Hi I wonder if anyone can help me with my problem. I have a 90 Bonneville 3.8 ltr with a separated crankshaft pulley damper. My question is, are all GM 3.8ltr pulley dampers the same, my local GM dealer wants $495.00 cdn for the part and so I was thinking of going to the wreckers ...
|
| head bolt torque specifications for 1992 2.0L pontiac sunbird | 04 Nov 2005 03:50 GMT | 1 |
does anyone know the proper torque and torque sequence for 1992 2.0 liter head bolts and the intake & exhaust bolt torque specifications.
|
| Front Wheel Bearing | 03 Nov 2005 22:41 GMT | 3 |
How hard is it to change a front wheel bearing in a 2000 Pont. GTP??
|
| abs warning light | 02 Nov 2005 06:21 GMT | 1 |
the abs warning light on my 1998 pontac grand am gt keeps coming on. I have had my brakes changed but this did not stop the problem. When the light comes on my brakes seems to stick when i come to a stop and start again. now my brake and check engine light comes on how or what ...
|
| 1991 Pontiac Grand Am Radiator Fan Problem | 02 Nov 2005 04:26 GMT | 1 |
I have a 1991 Pontiac Grand Am with a 2.5 liter 4 cylinder engine in my shop with a radiator fan control problem. If the air conditioning compressor is running, the radiator fan runs. If the air conditoner is switched off, the radiator fan turns off. The radiator fan does not
|
| 95 Grandam, Hellllpppp | 01 Nov 2005 03:43 GMT | 2 |
I have a 95 grandam with issues. About a year ago, I had a tune up as my car was running rough. When I got my car out, it was better for about a day. Then it seemed to be worse. I took it back and they told me it was an unrelated problem, and it was
|