1990 Pontiac Bonneville with 3800 engine.
After driving several hours,
pulled into traffic and wound the engine up a little to about 3000 rpm
maybe. Noticed the oil light on and no pressure on the gauge. Shut it

I was the one who had the 98' Pontiac Sunfire that was making insane
grinding and squelching noises on startup. Brought it in and it was a
failing Water Pump... a six hour job that ended up being around $700 at
the mechanic.

i had struts replaced in the rear. all is fine with that, BUT, i now have a
clunking sound in the rear end, it was not heard before because of the
sound of the struts were muffling it. any ideas what may be the problem?
thanks

have 93 grand am, 4 cyl,  badly in need of struts . How long a job is this,
both fronts need replaced. Also what should I expect to pay for just the
struts. Is there an online place I could check out for ordering. Got to get
back on road for gas mileage, truck killing me. Thanks

My 1988 Pontiac 6000 (2.5) with 125,000 miles has an issue.  (Doesn't it
always?)  Anyway, anymore, when I start it the car doesn't act like I'm
letting it turn over long enough.  The engine starts, but it doesn't act
like I've let it turn over long enough even though I am.  (I ...

I'm looking for a Pontiac Beaumont  - '67 - '69, ideally -  to restore,
but they seem to be pretty rare in this part of Canada. Would anyone
know of one for sale in the Toronto area, or even southern Ontario?
Feel free to respond this ad, or email me david_rempel71@yahoo.ca

My serpintine belt won't stop squealing, i've already had it replaced once
and then about 3 weeks later it started again is now worse than ever,
anyone else have this problem, can someone give me some insight on how to
fix it for more then just 3 weeks.

Is it possible to remove the oil pan (3.1 vin T) without droppng the cradle?

I just purchased this ride with 30k miles (black and near perfect
condition).....
I'd like to get some more hp without breaking the wallet...
I did the research for some "simple" mods but how simple are they really...

I would like to know how to install a ognition cylinder(lock and key) for a
94' Pontiac Grand Prix.