| Thread | Last Post | Replies |
|
| accessing flash codes | 09 May 2007 11:32 GMT | 2 |
I have a 2002 sunfire and just recently the check engine light came on. I
was wanting to know if I can access the codes with out a reader. I know
on some cars you can use a jumper wire to get blink codes. Can someone
help with this............thanks .......two-dogs
|
| Power Sunroof Won't Open All the Way (2002 Grand Prix) | 07 May 2007 01:23 GMT | 6 |
I just bought a 2002 Grand Prix, and the power sunroof won't open all
the way - at least sometimes: I tested it today, and it opened all the
way once. When it won't work right, it opens about half way (the
sunshade is already open completely). If I press the button again, it
|
| 99 GP PCV Valve Location? | 05 May 2007 20:38 GMT | 5 |
I was doing the oil / oil filter / air filter / gas filter change on my
wife's 99 GP (57Kmiles) and the book in the store listed a PVC valve so I
got one of those too (used to have an 80 225 slant six Cordoba whose PVC
valve used to clog with carbon a lot when the car got up ...
|
| 97 Grand Am getting hot. | 04 May 2007 04:38 GMT | 1 |
I have a 97 Grand Am with a 3.1 that keeps getting hot.Mostly when in town
it gets hot.Fan comes on when needed.It is a closed system and we keep
bleeding the air out through the bleeder,then add coolant when motor is
cooled off.Can smell coolant but can't find a leak.No oil in ...
|
| 99 Sunfire hard to start when warm | 04 May 2007 02:22 GMT | 2 |
I am at a loss to determine why my 2.2l sunfire will not start easily
after it has been running for a while. When the the engine is cold in
the morning it fires right up. An hour later or four hours later it
takes 15 to 30 seconds of cranking to get it going.
|
| 01 Grand AM removing door panel | 02 May 2007 14:58 GMT | 1 |
I have a 2001 Grand AM SE that I need to get the inside door panel on
the drivers side off of. I am missing some screws somewhere and I was
hoping someone might be able to tell me where to find them all. The
manual mirror adjustment knob somehow came lose and fell inside the
|
| Window lift motor mounting | 02 May 2007 03:16 GMT | 3 |
Ok, got a window motor for my '95 Trans Sport. Riveted the regulator
back on to the new motor. However, the rivets that need to go through
the door to mount the whole thing in place are too big for my rivet
gun.
|
| 2.4 98 Grand Am Water Pump | 02 May 2007 01:01 GMT | 11 |
This car is at the dealer for a water pump..
So far this car is going on 15 hours of labor.. I am only going to get
billed for 6 though..
Has anyone heard of this water pump turning into that much of a nighmare?
|
Sign In
Join
My Latest Posts
My Monitored Threads
My Blog
My Photo Gallery
My Profile
My Homepage
Start New Thread