| Thread | Last Post | Replies |
|
| Upgrading engine | 30 Jun 2007 17:35 GMT | 4 |
I own a 98 Bonneville SE. I love the performance that the 3800 Series 2 gives, but I want more. I want to upgrade to a V8 and am wondering if anyone knows whether this is possible with this model. If so, what is the limit for displacement.
|
| Interesting problem | 30 Jun 2007 15:26 GMT | 2 |
I recently fulled the car up with gas without over filling. Yet Fuel leaked out of the gas cap and ran down the exterior side of the car below the fill cap opening. The cap was secure. When driving I could small gas in the cabin. Was told that this may be a problem with the
|
| Req; help with blower switch for 70 LeMans. | 29 Jun 2007 17:49 GMT | 5 |
I have been haveing trouble with my blower motor comming and going. Sometimes it works and sometimes it doesn't.. Contact switch cleaner helped at first, but no longer. It has just about bit the dust now. I was thinking about putting a varriable speed control on the dash and
|
| 421 piston question | 29 Jun 2007 04:58 GMT | 8 |
I have a 64 421 that's been rebuilt once in it's life. It has 30 over pistons with the part number L2189. Anyone know where i can find the specs on this piston? I'm thinking it's an old sealed power number.
|
| Ping J.S. Cylinder heads for 421 | 28 Jun 2007 05:36 GMT | 3 |
Would 77-79 6.6/400ci heads work on a '64 421?
|
| 91 sunbird check engine light | 25 Jun 2007 07:54 GMT | 1 |
I have a 91 pontiac sunbird 2.0 - 4 cylinder. I was driving down the highway when the check engine light came on. I used a jumper wire and had a code 12 come up. Can anyone tell me what that code means or where I can get code information
|
| serpentine belt diagram for 99 grand am se 4 cyln. | 25 Jun 2007 07:48 GMT | 1 |
My belt on my 99 grand am gave way, got replacement belt, but now I am searching for routing diagram. can anyone attach jpg of diagram in email for me? Thank in advance alexandertaylorjr@gmail.com
|
| 67 firebird 421 engine swap question | 23 Jun 2007 20:53 GMT | 7 |
I'm working on a 67 Firebird with a 326 and an automatic. The 326 needs a rebuild but I also have a 421 shortblock I'm considering rebuilding instead. Will the 326 heads work with the 421, edelbrock performer manifold, performer cam and carb? I'm mostly concerned with having to ...
|
| oil light flickering | 22 Jun 2007 07:38 GMT | 2 |
i have a 94 grand prix(3.4), and have noticed that of late after the car running for a half hour or so,that when coming to a stop light the oil indicater light will come on untill i feed it a little gas or take off,it doesn't happen every time every now and then,after the car ...
|
| 1996 Firebird paint | 21 Jun 2007 21:17 GMT | 2 |
On the 1996 Pontiac Firebird in regards to the paint, does it have a clear plastic coat on it? I have some scuffs on it and want to eliminate them decently.
|
| Montana brakes: how long should they last? | 21 Jun 2007 17:18 GMT | 1 |
I have an '05 Montana. At about 40,000 mi. (60,000 km) there were bad passenger-side pulsations from the brakes and all parts were replaced under warranty (something about a known problem involving corrosion of brake parts).
|
| 88 V6 Formula Fiero water pump | 20 Jun 2007 21:05 GMT | 1 |
Is-it possible to change the water pump on my 88 Formula Fiero with the engine in place ?
|
| Source of parts | 19 Jun 2007 06:37 GMT | 1 |
Anyone know a good source of parts for the 96 series birds? The dealer can't order some of the parts I'm looking for and the junk yards around here don't seem to cater to Firebirds. Thanks!
|
| June 15 - Race Day is finally here. :) | 17 Jun 2007 18:58 GMT | 18 |
Hey, today's the day of the big race (05 GTO vs. "Farm truck") ...I'll let y'all in on the details after it's done! ...that is if Fweddie hasn't spent the last 3 months bluffin' and lyin' about his so-called **facts and proof** and his "brother" Mark that is "very close" and
|
| keyless remote problem | 16 Jun 2007 21:38 GMT | 5 |
i have a 94 pontiac with one of those small centurys that only have a trunk release,unlock and lock door features,problem is even after changing the battery in it, it still doesn't work,after not working for some time does it have to be re-programmed to work ?? if so ,does anyone ...
|