| Thread | Last Post | Replies |
|
| 97 trans sport side body molding removal? | 31 May 2008 10:12 GMT | 1 |
Do I need to take apart the interior to get off the lower side molding? Probably or is it glued? Need to Bondo couple of rocker panel fender holes in "97 trans sport. Excuse this maybe lazy dumb question but I'm too cheap to buy a book.
|
| 1996 Bonneville | 27 May 2008 01:54 GMT | 3 |
I'm looking at purchasinga 96 Bonneville with 113,000 miles on it - does the problem with the 3800 Series II show up earlier than this? Or should I stay away from the car?
|
| 1997 Grand Am heater core | 26 May 2008 13:58 GMT | 1 |
anybody knows an easy way to replace the heater core on a 1997 Pontiac Grand Am
 Signature Posted at author's request, using moderated http://www.AutoBoardz.com interface
|
| ’98 SUNFIRE INTERMITTENT START PROBLEM | 26 May 2008 13:57 GMT | 1 |
Sometimes my ’98 Sunfire won’t start until I tap the starter with hammer but that does not always work. When it doesn’t start there is n click, no starter turnover, no nothing when I turn the key. Battery is O because radio goes on and because I thoroughly cleaned and ...
|
| sunfire trunk dilema | 21 May 2008 00:49 GMT | 1 |
i have a 2002 sunfire and my trunk keeps opening without touching the remote, any ideas?
 Signature Posted at author's request, using moderated http://www.AutoBoardz.com interface
|
| Clock and radio settings | 18 May 2008 04:51 GMT | 2 |
I had a battery which didnt seem to be working very well. After several boosts I had the battery replaced under warranty. Now I have a fully charged battery and within a week of no use my rundown protection kicks in and I lose radio and clock settings and interior light
|
| removing the driver side door | 14 May 2008 18:34 GMT | 1 |
When removing the driver side door on a 1988 Firebird, do you have to remove the front fender first to get at the bolts etc. It seems to be the best way but a book I looked at didn't mention that part. What do the experts do?
|
| REALLY DUMB QUESTION 1992 Grand Prix. | 13 May 2008 20:29 GMT | 3 |
I just picked up a 1992 Grand Prix. There is supposed to be a trunk release somewhere in the car, but I can't find it. I figured that it would be a button in the console or glove box, but I cant' find one anywhere. Where the heck is it?
|
| 97 grand am rims | 13 May 2008 01:30 GMT | 1 |
I had a 97 grand am a few years ago and put after market rims on it. I am looking to sell these rims on eBay and was wondering what bolt pattern I should list them under. Anyone know what the bolt pattern would be or what other model these rims would fit? My car was a 2 door
|
| Gravity Bleeding Brakes ? | 11 May 2008 20:57 GMT | 15 |
Has anybody ever heard of Gravity Bleeding Brakes? Thats a new one on me. My GM mechanic friend said to crack the bleeder srews loose on both calipers and remove the cap from the Master Cylinder and about 15 minutes my line & new front hoses will be bled.
|
| 1994 3.8 TransSport"hunting" at light throttle | 11 May 2008 17:45 GMT | 2 |
I have a 1994 "L" code Trans Sport that has had a history of surging/bucking at light throttle, around 80-95kph. ( 90 just happens to be the speed limit on our "Urban Expressway") In the past (on 3 occaisions) the O2 sensor stopped clocking and stuck
|
| Shifting from drive to neutral when moving | 11 May 2008 14:15 GMT | 11 |
Does continual shifting from drive to neutral and back cause any long-term damage? What I mean is continually shifting into neutral when approaching stop signs and red lights?
|
| 97 Silhouette (Transport) | 06 May 2008 14:54 GMT | 3 |
I have a 97 Olds Silhouette. The other day when backing out of the garage, I put it in reverse and it didn't seem to engage, I then put it in neutral and then drive and it wouldn't engage. I put it in park for a bit and back in reverse, still would not engage, I gave it some gas ...
|
| G8 Issues | 04 May 2008 19:46 GMT | 6 |
Does anyone know why the G8 is governed at a paltry 135 mph? My '00 SSEi has 121 fewer horsepower and will do 130. Seems very low for this car, I was expecting 145-150. Lee
|
| Pontiac Grand AM 1998 Hex Caliper Bolt | 02 May 2008 21:04 GMT | 1 |
Anyone know what size hex wrench I need for the front disc brakes on a 1998 Pontiac Grand Am? joe
|