I have a 84 944 and the clutch no longer works.  It goes right to the floor.
A few years back I had this fixed at the shop, it turned out to be the slave
cylinder.  I am wondering what parts have to be removed to fix this?  How
difficult it is?

What is the best oil to run on a 944 with over 100K miles on it?
Specifically, a pure synthetic oil like Mobil 1, a synthetic /
petroleum base mixture, or strictly petroleum base oil? And what
weight is the best, a multi weight like 20W50W, 10W40W, or a straight

I'm preparing to rebuild the clutch master and slave cylinders on a
1987 944 n/a. What tools will I want for this procedure, other than
the tools required to remove the cylinders from the car? Is anyone
aware of any links, websites, or write-ups on this process?

A guy in my area is selling a black 1984 944 with app110,000 miles. I have not
seen or driven the car, but from the pics, the body looks like it's in nice
shape and the engine compartment looks fairly clean. The seller says the
moonroof leaks occasionally "depending on the angle of ...

my 944 1982 was not used for 4 years....
i got all the rust off the discs but the brakes are very spongy and i cant
get any hard braking out of the ???
why is this any ideas, i am about to bleed the fluid.

hiya...
just wondering where can i download a workshop manual from, i tried the
website listed a couple of months ago but the file is not complete...
plz help

Does anyone have the instructions on how to bleed the clutch master and
slave cylinders?  TIA
Agelon Jones
86' 944NA

Ok Guys,
Here's the situation.
I've had an early 85 944 for about 5 years...  It ran great for the first 4
and had tons of power.  Now I am experiencing some trouble.

  I have an 87 944 turbo.  Often, when I turn off the headlights, the
light assemblies will cycle open and closes many times before going into
their proper closed position.  Any ideas?
Ralph

hiya guys.... i finail got it started after 3 weeks, thanks for the help
from all. (it was the speed sensor)
But there is tapping in the engine? what is the cause of this?
it has been inm storage for 4 years though, i will change oil today....

My 85.5  944 seems to have an exhaust leak (smell) under hard acceleration.
Is there some kind of valve or waste gate that could be leaking by?
Thanks in advance,
drhenson@sbcglobal.net

Can Anyone give me some tips on buying a 944 and what I should be looking
for? Any common problems? Thanks

hello people...
wondering if you can help me, i have just brought a 944 which has not been
mobile since 2000. i am experiencing some problems, i am not getting a
spark from my ignition coil, i have just replace it with a new one. when i

DG is the speed sensor
BG is the referance mark sensor,
but i want to ask are these two sensors the same part, cause all i see is
referance mark sensor on the net?

I've got a 1986 944 that needs a new set of tires. A  couple of them need
replaced because of age cracking. I've had the car for about 1 and a half
years and have not had to use the spare so I may have been lucky up to now.
I doubt if the spare has ever been used. It appears to be ...