| Thread | Last Post | Replies |
|
| Can air bag steering wheel be replaced? | 31 Aug 2004 04:48 GMT | 3 |
My 87 951 has blown the bags in the past and the air bag controller needs to be replaced anyhow, just a track car now, can aftermarket steering wheels be fitted or are you stuck with the airbag wheel forever? thanks, John
|
| Emergency Brake Problem | 29 Aug 2004 15:53 GMT | 3 |
The release button on the emergency brake popped out and the lever will not hold its position. Has anyone ever had this happen to them and know how to fix it? Thanks in advanced...
|
| t-belt & water pump replacement | 29 Aug 2004 13:36 GMT | 8 |
Ok thanks for being patient with me.. So I had this German car shop listen this loud knocking noise that the car made when it was cold only, and they did say I had lifter noise but also said the t-belt was so loose that it was causing something to bang against
|
| 1987 944S Air Conditioning | 29 Aug 2004 04:07 GMT | 9 |
I just picked up a 1987 944S. It's in pretty good shape and I have all the records for the last 6 years. Are the 944S's know to have really crappy air conditioning? It was rather warm today in the low 90's and humid and I switched on the air... Basically
|
| differnce between 944s and 944s2 | 27 Aug 2004 06:32 GMT | 4 |
What is the differnce between the 944s and a 944S2?
|
| Momo Steering Wheel | 22 Aug 2004 20:29 GMT | 2 |
I am looking for a new or like new Momo "Club 3" steering wheel for my 951 at a resonable price. I believe it has been discontinued. Thanks for any insight!
|
| Compatible Motronic units | 22 Aug 2004 17:21 GMT | 5 |
Can anyone tell me if these Motronic DME units will work in the same 1985.5 944? I bought one from a parts yard, installed it, and still no spark. I'm wondering if they're compatible because the numbers aren't the same. The parts yard claimed it came from a running 1985 944.
|
| Cure for older overheating 944 | 21 Aug 2004 08:21 GMT | 1 |
I have an 84 944 na. Like most older 944's it had a tendency to run on the hot side in hot weather. (90f+). I tried coolant additives which helped but in a recent exercise to change the thermo switch on the radiator after I removed the fan housing I used compressed air to
|
| 944 tranny input shaft seal | 19 Aug 2004 04:26 GMT | 3 |
Does anyone know if the tranny input shaft seal can be changed without removing the transmission? Sounds like a dumb question, but if the coupler slides far enough forward, it seems like I might be able to snake the old seal out and the new one in.
|
| 944 1988 2.5 rough idle | 18 Aug 2004 21:13 GMT | 2 |
i currently have a 944 2.5 8v with 116000 , 2 months ago the radiator burst and a new one instaled. I now have a slight problem that when i first start the car it idles rough for aprox, 40 seconds .
|
| 1987 944 turbo | 18 Aug 2004 06:58 GMT | 6 |
Im looking at buying another Porsche this time the 951 rather then a NA. Aside from the usual prepurchase inspection is there anything I should be looking for first. I am told that there is a small leak in the breaking/ clutch system because it needs to be refilled every 2
|
| 87 944 instrument light in the odemeter | 16 Aug 2004 06:51 GMT | 10 |
hello, can someone assist me with this. The red center light(look like an exclamation mark)that sit above the signal lights stayed on while i'm driving. It doesn't light up when I start the vehicle......I checked the fuse box and everything is in place. I looked at the service ...
|
| battery | 16 Aug 2004 05:44 GMT | 9 |
ok gents---besides sears-- who makes a battery for the 944? It needs 675 cold cranking amps with an exterior size of 7" high 7 inches deep and 10 " long. Any help greatly appreciated! Brian Moore
|
| daily driver | 16 Aug 2004 05:42 GMT | 6 |
I'm just looking for some general information from experienced owners. I am vaguely considering purchasing a 944 for both its practical and Porschephile reasons. The car would be driven about 4-500 miles per week for work. It would have
|
| 88 944S Front Wheel bearing and rear bushing | 15 Aug 2004 13:29 GMT | 1 |
I want to replace the outer front bearing on my 1988 944S. Anyone has experience doing this work? Anyone has replaced rear bushing? I hear a 'TOC" when turning or when I start moving. The sound come from the back. I suspect two bushing
|