24 / 7 Online Catalog       www.dvwimportautoparts.com
Thanks for Looking !!!

The petrol ones that is, and what does Aero mean, like is it an engine or a
trim spec.

Not that I smoke, but the empty hole looks so... empty.  Looked on
eeuroparts.com but couldn't find one.  Anyone know of a good supplier
of little things like this?
~GJ~

I have to replace the aluminium brackets from either end of the bush
(front lower control arms)
Fotos:
http://www.saab-cars.de/foren/saabforum/phpBB2/files/saab.jpg

Recently I ran across a couple of articles addressing the removal of the
axle from the cv. This is the outboard drivers side boot that needs
replacement. The articles state once you loosen the lower ball joint from
the lower A frame, spread the circlip and the axle should ...

Today a danish car-mag. brings a translation of an artikle from the German
"Stern" magazine. The GM CEO Rick Wagoner says that the carplant with the
best effiency will get to produce Saab's and Opel Vectra's. And as it seems,
the Saab factory in Trollh?ttan is way faster to ...

Guys,
I am planning to buy 9-3 Aero.
I will be soon moving to Toronto, Canada. Need your advise if
this car will be good in the canadian cold weather..

Will the factory wheels from an 85 900 Turbo fit a 92 9000S ( 15 inch 4
hole).. I seem to recall reading taht they are only compatible from 89
onwards??

 I was looking at possibly buying a '87 Saab 9000 with 114k miles on it.
The only problem is the the slave cylinder needs to be replaced. My
question is how much would it cost to have someone do it for me, and how
hard is it to do yourself?

http://www.channelnewsasia.com/stories/afp_world_business/view/104653/1/
.html
I know it was said when they worked with Fiat/Lancia/Alfa, and when they
got bought by GM, and when they built the Saabaru.

Want to put a new diode on the resistor pack, this is the pack in the blower
housing. The old diode was clamped on by a previous owner, and probably of
wrong capacity. As the pack failed, I took it out and removed the diode.
However, this was some time ago, and the project was put ...

I have a recently purchased 9-3 S Convertible with the HOT engine. I noticed
on my garage floor that there are particles of soot...blown out of the
exhaust at starting the engine. The chrome exhaust tip is black now
too...does it sound like I have a problem or is this to be ...

Any one know were I can find a Direct Ignition Cassette, the Red One for
my 1992 9000 CD Turbo.  Pre owned would be best. I am from N.E.
Pennsylvania ?
Thanks,

I changed my head gasket this summer, just thought I should share the pics
from the event with you. It was pretty straight forward, required no special
tools besides the inverse torx for the head bolts, and was pretty easy since
I had no turbo or AC that had to be moved. My ...

Anyone knows whether changing headlight wiper motors on a '97 9000 CS is
a difficult task? Last time I did it was on a 99 with the central motor
attached to the cooler and with the two rods making the horisontal
sweeping movement, this was fairly simple.