| Thread | Last Post | Replies |
|
| Theft alarm going off on '99 9.3 | 08 Apr 2005 09:48 GMT | 1 |
Hello, Saabists. My 99 9.3 has been showing "service theft alarm" on the radio thing when I start the car for some months now. I have no nearby dealer, and the local mechanic hasn't figured our how to disable the alarm (I'd be perfectly happy to have no alarm). Just this
|
| AC doesn't work when hot / strange starting problem on 9000CS | 08 Apr 2005 08:19 GMT | 2 |
Wonder if anyone can help me with my '95 9000 CS. First the starting problem which i got recently: Engine doesn't fire when started, battery is ok, start engine seems powerfull enough but engine doesn't take off. I found out that disconnecting the battery for
|
| [Saab_c900] Wheel spacers for use with Ronal/Shelby wheels? | 08 Apr 2005 00:36 GMT | 5 |
I've been having problems finding lugnuts the right length to use with the Shelby wheels fitted to my 1983 900S. I've had to install additional washers under the lugnuts on a couple of the wheels as the nuts have bottomed out (only just) on the brake disks.
|
| Any Saab employees here? | 07 Apr 2005 23:24 GMT | 48 |
Seems like they should make themselves known....even if they include the standard disclaimer "the opinions expressed herein are not necessarily those of GM Corp. blah blah blah". Or better yet, id themselves with the tag [SAAB] after their name.
|
| saab fenders | 07 Apr 2005 21:20 GMT | 1 |
does anyone know if the 900 fenders are the same as the 9-3 fenders??
|
| 2000 9-5 Aero Hydraulic sound/noise | 07 Apr 2005 10:31 GMT | 4 |
I am experiencing two sounds from the engine compartment that I have been unable to identify and would like your help. When starting out cold (I am located in New England) there is a sound like a squealing v-belt. It only makes this sound when the engine is cold and until
|
| Fried Starter on 1989 Saab 900? | 07 Apr 2005 02:34 GMT | 10 |
I think I already know the answer to this but I want to confirm. I live in the northeastern US and during that really bad cold snap we had earlier this winter the ignition was frozen such that it wouldn't turn. After blasting it with a hair dryer for about a half hour, the key
|
| rear wiper | 07 Apr 2005 00:46 GMT | 1 |
Am I correct in assuming the rear wiper for my 97 900se is the same size as the from windshield wipers? ~GJ~
|
| 1995 Saab 9000CS for sale in NJ | 05 Apr 2005 20:22 GMT | 2 |
I am selling my Saab. I called her Saabira, which is an Arabic name which means "patience." I will miss her. It runs very well. It has 171,000 miles on it. http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=4540039290
|
| Climate control for 900 | 05 Apr 2005 15:37 GMT | 5 |
I'm thinking about replacing the manual heater/aircon controls in my 1995 900 with a climate control unit from a later model. I've been told that the heater 'box' is the same but I will need to install the servo's to operate the controls, the wiring harness, the cabin heat sensor ...
|
| 2000 9-3 check engine light | 05 Apr 2005 15:31 GMT | 1 |
I own a base 2000 9-3 with 62k miles and 5spd gear box. Today the check engine light came on after filling my gas tank. I have checked the gas cap and unfortunatly is not solving the problem. It also seems that the turbo isnt responding as normal, the gauge will go up but doesnt ...
|
| Another 9000 question - CS Turbo without turbo gauge? | 05 Apr 2005 15:27 GMT | 16 |
First, let me say thanks to all who have answered my previous questions. I was very interested in this 9000 CS Turbo in Wisconsin (about 300 miles away). Before making plans to drive out I asked every question I could think of. 9000 seems like a nice car, but... it has no turbo
|
| Seat belt too short for child seat | 05 Apr 2005 09:10 GMT | 5 |
I wonder whether somebody could help me with the following problem. In my Saab 9-3 (2002) the seat belt in the back seat is too short to fit in a childseat (Maxi Cosi) easily. Does anybody know a safe and not too expensive way to resolve this problem?
|
| Sunroof closing problem | 05 Apr 2005 05:56 GMT | 3 |
I have a 1992 900 SE Coupe with a sunroof problem. The problem only started recently and was noticed only because I started hearing wind noise coming from the sunroof. I looked at it and found that when closed there is a gap of about 3mm between the front seal and the edge of the ...
|
| How to remove the SID screen on a 9-3 2000 ? | 05 Apr 2005 03:04 GMT | 2 |
Some pixels are not diplayed on the SID (9-3 2000) and I would like to resolder the contacts between the cable and the PCB but I do not know how to remove the SID screen ? Any tricks ? similar problems ? Thank you..
|