Saab finally offers an SUV
at http://www.washtimes.com/autoweekend/newcars.htm

lets see. my clutch cable broke a couple weeks ago, and i got that all
straightened out. although, its a little loose and makes the clutch do a
whistling sound at idle. how do i fix this? around the time the cable
broke, my cruise control and door speakers went out as well. any ...

I pushed in the clutch on my 92 9000 Turbo w/191k miles today and it
went to the floor.
I am not used to sudden catastrophic failure of a hydraulic clutch. The
linkage seems fine, the plunger seems to be going into the master

I've set up a donation facility for the Craig's Classic Saab Workshop
website. If you would like to make a donation, please read the info on the
site at "http://www.saab900classic.net/about.html#donation", or just ask
and I'll forward some info to you.

At fckn last ... SAAB have come up with something that makes a modern car
worth buying. I must say, my allegiances started to slip towards Volvo over
this matter, but SAAB have finally "got it".
<http://www.trollhattansaab.net/archives/2005/04/more_on_the_bio.html>

For a 202b engine for a 1985 T16 (SPG) full turbo I want NGK plugs
which should I buy
NGK BCPR7EIX  OR BCP6EV  OR OTHER?

could the wastegate have an effect on the turbo boost? someone told me
the boost can drop because of the wastegate. please help!

I recently replaced my clutch master cylinder.  I'm getting conditions where
my  clutch sticks, can't pull the car out of gear, etc.  There's always a
nice little puddle of hydraulic fluid.  The saab faq's state that's usually
the slave cylinder, but I'm not too certain that it ...

I'm trying to replace a dud balljoint on my 1985 900i (they all need
replacing but one at a time suits me so far!) and am a bit stuck (for want
of a better phrase!). I've posted a couple of messages and linked to some
pictures via this forum thread:

Due to the DI-Cassette problems...
 http://www.autospectator.com/modules/news/article.php?storyid=2214
- tex

http://www.autoweek.com/news.cms?newsId=103323
...As expected with the recent announcement of GM dropping its share in Fuji
Heavy Industries (Subaru).
- tex

Hi, put the front right shock back on it's mount on the a-arm on my 1985
900i today after replacing the balljoints and the tie-rod end.
Problem I have is that the nut to secure the shock to the a-arm won't torque
up - it's really tight but it's turning like it's twisted off it's ...

I have a 2000 9-3 Convertible.  I stalled (manual transmission) the
other day.  I turned off the car and when I tried to restart it nothing
happened.
The car does not 'turn over'.  When I put the key in the radio seems to

My clutch pedal in the cab seems to have more free play than actual
travel.
I've got reciepts in the wad that came with it for a fairly recent
clutch and a rebuild kit for the slave cylinder.

    I know you guys are wizards at magical fixes. Anyone had a
problem with an albeit faulty pixelated service message "Service Theft
Alarm?" The usual chirpy whistle is gone, but the lights still flash
and the door locks still work normally.