| Thread | Last Post | Replies |
|
| SL1 1998 Overheating after visit to dealer. (97000 miles) | 20 Jul 2007 19:21 GMT | 10 |
Ok, here is the problem. a few weeks ago a slight knocking sound and a soft howl started. I had no other issues as for as I could tell. And checked and replaced my fluids ever 3 to 4 months. My room mates said I should take it in for a repairs directly to the
|
| XM Raido and My 2007 Saturn ION.... | 20 Jul 2007 16:33 GMT | 1 |
All, I have a 2007 Saturn ION that I have been very happy with and I now wish I included the XM Radio with its purchase. My questions and dilemmas are as follows;
|
| XM Radio and 2007 Saturn ION..... | 20 Jul 2007 01:38 GMT | 1 |
All, I have a 2007 Saturn ION that I have been very happy with and I now wish I included the XM Radio with its purchase. My questions and dilemmas are as follows;
|
| Tire Pressure | 18 Jul 2007 18:45 GMT | 6 |
Why do tires blow on the highway? Is it becuase of High tire pressure, or low pressure? Peace, Jerry
|
| Has anyone has any experinece with after market upholstery and carpet vendors? | 16 Jul 2007 01:55 GMT | 1 |
Has anyone had any experience with on-line carpet or upholstery vendors? I have a 96 SC2 with 186K, so both the carpet and the upholstery are showing their age. So now I'm looking to buy, and install myself, both new carpet and upholstery. The upholstery was
|
| Saturn Of Long Island City customers... | 13 Jul 2007 12:11 GMT | 1 |
If you bought your Saturn at the now defunct Saturn of LIC in NYC maybe you can help. The alarm they installed is supposed to warranted for the life of the car but unfortunately I have no way of contacting that alarm company that installed it for them. Saturn of Bay Ridge was
|
| help ignition switch problem ! | 13 Jul 2007 04:46 GMT | 5 |
Hello I have a problem with 93 sl2 ignition switch it is now locked in acc possition and cant be moved or removed, also the trans can be shifted from park to any position without aplying brake. before this hapened i noticed the key fit in the ignition very loosely
|
| 97 SW1 Ignition switch ??? | 11 Jul 2007 23:18 GMT | 2 |
97 SW1, 171,000 miles, 275200 kilometers. The tumbler on the ignition switch has been messed up for a couple of years now (where you have to fight it to get the key in the ignition slot).
|
| Gullwing Sky | 11 Jul 2007 00:05 GMT | 5 |
Ran across this some time ago, just now got around to posting it http://www.mooremilitaria.com/misc__photos.htm (scroll about half way down)
|
| Saturn sl1 1993 door wont open | 09 Jul 2007 03:25 GMT | 2 |
I have a question about my saturn. The driver side door will not open. I think something in the latch assembly is broken. My biggest problem is how to get the door open so I can replace the latch, or even get a look at it. With the door closed, you can't even get the inside
|
| Rear Door Step Plate | 09 Jul 2007 02:50 GMT | 2 |
I'm not sure what to call it... it's underneath the passenger side rear door on my 1996 SL2 and I imagine it's the same on most SLs. I think rust is a common problem in that area and I'm not sure why it happens. Anyway, the step plate won't stay in its place, so I was thinking
|
| power steering reservior and header pipe | 09 Jul 2007 00:48 GMT | 1 |
Looking for advice as to how to best remove the reservior from the power steering pump on a 93 SL2. It has two metal clips with a tab on each that are tensioned down against the body of the pump. I can pop these up with a screw driver, but looking for a way to slide the clip
|
| SC2 CD-Changer questions | 08 Jul 2007 18:28 GMT | 11 |
I bought my 1997 SC2 brand new with the factory stereo and equalizer package, but I didn't have the CD-changer installed until about a year later. Now, the CD changer is starting to have trouble detecting discs. It
|
| 93 SW2 rear hatch speaker cover | 08 Jul 2007 17:24 GMT | 1 |
I see the pop-in rivets and have removed these. Got the plastic inside cowl removed, where the wiring harness was attached to. However the last cover seems to be a bear to get out, the cover over the rear wiper motor. Does one need a special tool to pop
|
| 98 Sc2 1.9L starter | 06 Jul 2007 22:22 GMT | 1 |
Any advice on changing the starter in a 98 SC2 1.9L? Special tools needed? I saw the thread above about it being a 6 hour job, hopefully this one is different! Carl
|