The car is a 99 sw2. Stereo worked fine until a few days ago, when
suddenly, it stopped putting out any sound. The stereo still works -
the disc is certainly being read and played, but there is simply no
sound. I've checked and re-checked all wiring and fuses. What am I

did I Get cheated I paid 324 for a ignition switch to be put in?

I have 1996 saturn sl2. 140,000 miles, decent shape, recently when the
car is started it revs up to about 3000 rpms, then idles down to about
1000 rpms. everytime i put it in gear it idles down but when i put it
in park or nuetral, it revs up and eventually comes back down It

I just finished a blueprint ovehaul of my "94 SL2, and want to get a
two row performance radiator to add extra cooling capacity before next
summer. I found a place on line that sells them, but the URL was lost
when my saved sites got blown away on AOL.  Does anybody know who

Thanks Bob & Folks
My problem with the reverse/back-up lights switch is resolved. I was
examining the wrong switch to be honest. There are two sensors that
appear similar on my manual transaxle case. One sensor (2 wire) is near

I heard a clunk in the rear going over a bump. Thought it was a bad shock
but it turned out to be a worn lower control arm outer bushing. I called two
parts dealers and they have no listing for bushings. Before I go to Saturn
parts, does anybody have information on the ...

Was wondering if anybody knows the service bulletin for this. Received it
about 8 months ago. Stating malfuntion with running lights. They stop
working or start blinking. Mine is doing it now, but I can find the recall.

Hey, I love my ecotec engine but am getting sick/bored of the rest of my
ION. Been liking the looks of the G5/G6 4cyl and wanted to know your
thoughts on reliability and especially quality, especially since you seem to
know Pontiacs pretty well.

The last item of my 100,000 mile maintanence schedule is replacing the
fuel filter.  I got a new one from the dealer and started the change.
The outlet line came off with no problems, but I can't seem to find
how the two inlet lines lines are secured to the old filter.  There's

I have a 1998 SL2 and the 10 amp body fuse blows.  Tried a 20 amp
(danger!) and it immediately blew, too.
The dome light doesn't work, is it on that circuit?  The side towards
the switch behaves like a switched ground connection:

OK