Some of you may remember my thread I posted about me retreving the old
50 champion. Well I was working on it this past week, and it finally
dawned on me that it has a seemingly factory 2-piece windshield. I'm
not sure if some 50's were made this way or what, this is beyond my

How's this for a candid description of his car?
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=2451949558
Paul Johnson

What is the perferred method of tieing down a car on a car trailer?
What size straps do you Recommend?
I will be hauling a 57 Golden Hawk,  a 55 Commander, a subcompact
Kubota tractor from tinme to time. (not all at once <g>

Just went through my last 5lb tub of Quaker State wheel bearing ( the baby
chitt yellow, heavy, thick, stay where you put it, won't migrate out from
around the old style felt seals) grease.  I bought 5 tubs of this grease
quite a few years ago.  I have been unable to find anything ...

Valve cover racing is catching on around here .
Anyone have a old valve cover from a streight eight Stude that is not dinted
up who wants to part with ?

I've searched with no luck for a replacement battery box.  Anyone had
any luck in rehabbing an old but structurally sound box?  Eastwood Co.
sells a battery tray coating (Item # 25011Z) which looks like the
right stuff for the job.  Anyone used this product before?

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&category=6466&ite
m=2453354370
Does ANYONE know this car?  The pic of the interior are SOOO fuzzy it hurts to
LOOK at it.  And it's been strippeed and re-done yet there are still rust

Welp,
   I've not seen anyone else mention it here, so I will.  How about a
chance on a nice '62 GT Hawk?  I've got custody of 50-some chances on the GT
Hawk that's being raffled by the Keystone Chapter of SDC. I joined said

I need info on some  inch and a half bore, bearings that can:
take a SIDE thrust, and maybe run at up to 2,000 RPM.
sealed is pretty much required...
need to make a wood lathe head, that can handle a 6 foot piece

  Well, at least I can pull it in and out of the garage. It starts
right up on the key, battery is charging, nothing pouring out on the
garage floor, life is good. Tuesday my new lift is being delivered and
we can do some serious production work.

I am writing from work because my home computer is locked down with some
monstrous virus or spyware. This thing is even preventing Norton Anti-virus
from running!
I found something called "Clean Soap" or "Soap Clean" trying tom take over

I am having a problem with my 94 Jeep Wrangler.  For some reason, every once
in awhile it appears the oil pressure gets too high and pukes oil out the
dipstick tube.  The first time I had it in my mechanic said he thought it
was a faulty oil filter even though there really wasn't a ...

test

I need to change the clutch on my '60 Lark VIII wagon. (3spd O/D) I'd like
to order the parts before hand, so I can do it in one shot. The problem is I
don't know if it's a 10 or a 10.5 disk & plate, etc.
Q: Could I just order a 10.5 clutch disk and pressure plate,  or does the

The Barrett- Jackson Scottsdale 2004 auction listing is now up on their
website. Interestingly enough, there are three Studes as well as two Avanti
II's. The three studes are a 53 Commander starliner, 55 speedster and a 56
golden Hawk. The funny part is, that the 56 golden hawk was ...